6.1 Display and Symbols
Stability mark.
When the current weight value is not changing, this mark is displayed. The reading may now be taken.
Zero point mark.
With nothing on the pan and pressing the ZERO switch, this mark is displayed. The zero point is the starting point to weighing.
Net mark.
After pressing the TARE switch this mark is displayed to show net weight is displayed
Preset tare mark.
When storing a tare with digital input this mark blinks.
Accumulation mark.
When using the accumulation function, this mark is displayed.
Low battery mark for type L.
When the battery power is low this mark is displayed.
Replace with six new batteries.
Ready mark for the full/dribble batch function. This mark shows:
ON
OFF
Blinking
The weighing range indicator.
The current range is indicated.
The comparator indicator.
Using the comparator function and comparing a weighing value with the upper and lower limits, the result is indicated.
Using the full/dribble batch function, the full flow gate indicator is shown as OK, the dribble flow gate indicator as HI and the zero band indicator as LO.
Example:- Display of zero (zero point).
With an empty weighing pan by pressing the ZERO switch:-
The Zero mark is displayed.
The stability mark is displayed.