A&D HV-G Series instruction manual Function to hold the current display value. When

Item	Display	Meaning and purpose
		The function to hold the current display value. When the
		value becomes near-zero and the weighing value changes
		more than 25% +30 digits, hold display is cancelled.
Hold	f12 0 #	Not used
	f12 1	The hold function is ON or OFF alternately by the F switch.
	f12 2	Displaying the stability mark, the display is held.
		Selection of readability and response by averaging the weighing
		value.
Averaging	f13 0 #	Normal weighing.
	f13 1	Scale for a person’s weight.
	f13 2	Animal weighing.
		Selects a storable minimum unit mass in the counting mode.
Precision	f14 0 #	Stores a unit mass using the unit of a digit.
of	f14 1	Stores a unit mass in the unit of one eighth digit.
unit mass	f14 2	Stores a unit mass, if the total of sample mass is heavier
		than 5 digits.
		Refer to “16.1. Data Format”.
Data	f15 0 #	Format 1. (A&D general format for scales, balances)
Format	f15 1	Format 2. (Older HV-A/ HW-A format)
		It is necessary to use option OP-06 for type V.
		Use Print out of date. Caution Date is not updated.
Date		Print out of the management number for the scale.
	f16	No print out.
	000000
		The relation between printout and display is as follows:
	other	Display	990721
		Printout	99/07/21

HV-G Instruction Manual Page 47