A&D HV-G Series instruction manual Parameter and display an item of the full/dribble

12.1 Preparation (Setting Parameters)

Step 1 Turn off the display.

Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.

Step 2	Press the		ENTER		switch to display an item of
	the comparator function (						f6	).
Step 3	Select a parameter of the full/dribble batch
	function (		f6 9 ) with the ^ switch.
Step 4	Press the					switch to store the new
				ENTER
	parameter and display an item of the full/dribble
	batch sub-function (					f10	) .
Step 5	Select a parameter of the full/dribble batch sub-
	function (	f10 0 ~ f10 3					) with the ^ switch.
Step 6	Press the					switch to store the new
				ENTER
	parameter
Step 7	Press the		F switch and the
								ENTER	switch to
	exit from the function table. Then the scale dis-
	plays the weighing mode.

HV-G Instruction Manual Page 34