A&D HV-G Series instruction manual Stream Mode, Preparation and Performance Examples

Page 52

16.2 Stream Mode

The scale outputs the current display data at the same time as refreshing the display. The scale does not output data while in the setting mode.

 

Averaging function table

Refresh rate

 

f13

0

Normal weighing

Approximately 7 times/s while the display is

 

 

 

 

unstable.

 

 

 

 

Approximately 4 times/s when the display is stable

 

 

 

 

 

 

f13

1

A person’s weight

Approximately 4 times/s

 

 

 

 

 

 

f13

1

Animal weighing

Approximately 4 times/s

 

 

 

 

 

16.2.1 Preparation and Performance (Examples)

Step 1 Turn off the display.

Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.

Step 2

Select a parameter for the “baud rate ( f4 )”

 

using the

 

and ^ switches.

 

ENTER

Step 3 Select “stream mode ( f5 0 )” of “output” using the ENTER and ^ switches.

Step 4 Select “format 1 ( f15 0 )” of “format” using the

ENTER and ^ switches.

Step 5 Press the ENTER switch to store the new parameters. The scale returns to normal weighing and outputs the data countinuously.

HV-G Instruction Manual Page 51

Page 51 Page 53
Image 52
Page 51 Page 53
Contents HV-G Series Contents Page Compliance Compliance with FCC rulesOutline and Features Unpacking Accessories and Options list Type Products AccessoriesOrder code or option name Accessories Options ListPrecautions for Operating the Scale Precautions for Installing the ScalePrecautions for Storing the Scale Installing the Scale Installing the Batteries for Type L Names Display and Symbols OFFPage Switches Page Turning the Scale On/Off & Basic Weighing Basic OperationMemo Type L with Batteries Tare and Net Display Semi-Automatic Tare Input by WeighingWeighing Range Weighing RangeOperation and Performance Products Weighing RangeMode Switch Changing Unit & Mode Counting Mode Storing a Unit MassCounting the number of articles Percentage Mode Storing a 100% MassReading Percentage Accumulation Function Operation and SwitchesFunction table Meaning & Purpose Preparation Setting Parameters Operation and Performance Examples ExampleComparator Function Comparator SignComparison Condition Function table Meaning and PurposeAccumulation function f6 Step If one Has Been selected, press Case Full/Dribble Batch Function Full/Dribble batch sub-function ComparatorHold Parameter and display an item of the full/dribble Switch to display the HI Simple Batch Function Function Table Meaning and purpose Simple batch functionPreparation Setting Parameters Operation and Performance Examples Calibration Adjusting the Scale Gravity Acceleration Table Complete Calibration Procedure Gravity Acceleration CorrectionCalibration of the Zero Point Procedure for Setting Parameters Function Table15.2 Parameter List Display Meaning and purpose Function or full/dribble batch functionPrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Data Format FormatFormat Stream Mode Preparation and Performance ExamplesCancel of tare Command ModeTare Preset tare Upper limit valueFinal value Preparation Setting Parameters Options Pin connections Pin No Signal name Direction Description17.1 RS-232C / Relay output / Buzzer OP-03 Pin No Signal name Direction Description 17.2 RS-422 / RS-485 / Relay output OP-04Installing OP-04 Communication Format Zero Lower limit valueReset of Accumulation data and number Accumulation data outputAccumulation count output Final valueInternal Printer for Type V OP-06 SpecificationConsumables Disassembly InstallationPerformance Check Specifications HV-G seriesDimensions Page Maintenance Check Points Before Calling MaintenanceRepair This situation Confirm these items
Top Page Image Contents