A&D HV-G Series Accumulation Function, Operation and Switches, Function table Meaning & Purpose

Page 26

10 Accumulation Function

This function counts the number of weighed items, calculates the total mass value and can display the number and accumulated mass value.

It is necessary to set the parameters of the “accumulation function (f8 )” in the function table in advance to use this function.

It is necessary to set the parameters of the “print mode ( f9 )” in the function table in advance to use the optional built-in printer.

Operation and Switches

 

The display of the accumulation count has a blinking

without a unit

The display of the accumulation value has a unit and a blinking

Pressing the MODE switch, the accumulation count and accumulation value is displayed.

Pressing the ZERO switch in the accumulation function (while a blinking ) resets the current function. (The count and accumulated value become zero.)

When the optional built-in printer is installed and the PRINT switch is pressed, the accumulation data, date and data number are printed. Date is set at function table f16 .

Caution

The accumulation function can only be used with the first weighing unit accumulated.

Parameter List and Word Definition

The “near-zero” is within ±4 digits from the zero point in the unit of kg. The “digit” a unit of display, is equivalent to the minimum graduation. The “zero point” is the fundamental starting point to weighing.

 

Function table

Meaning & Purpose

 

 

f8

0

Accumulation function is not used.

 

 

 

 

The scale accumulates the data, if the F switch is pressed when

 

 

 

 

the display is a positive stable value above near-zero. The next

 

 

f8

1

accumulation can be performed after the display returns to

 

 

 

 

near-zero or to a negative value.

 

 

f8

2

The scale accumulates the data, if the F switch is pressed, when

 

 

 

 

the display is a stable value and outside near-zero. The next

 

 

 

 

accumulation can be performed after the display returns to

 

 

 

 

near-zero.

 

 

f8

3

When the display is a positive stable value, the scale accumulates

 

 

 

 

the data automatically. The next accumulation can be performed

 

 

 

 

after the display returns to near-zero or to a negative value.

 

 

 

 

 

HV-G Instruction Manual Page 25

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HV-G Series Contents Page Compliance Compliance with FCC rulesOutline and Features Unpacking Accessories and Options list Type Products AccessoriesOrder code or option name Accessories Options ListPrecautions for Storing the Scale Precautions for Installing the ScalePrecautions for Operating the Scale Installing the Scale Installing the Batteries for Type L Names Display and Symbols OFFPage Switches Page Memo Basic OperationTurning the Scale On/Off & Basic Weighing Type L with Batteries Tare and Net Display Semi-Automatic Tare Input by WeighingOperation and Performance Weighing RangeWeighing Range Products Weighing RangeMode Switch Changing Unit & Mode Counting Mode Storing a Unit MassCounting the number of articles Percentage Mode Storing a 100% MassReading Percentage Function table Meaning & Purpose Operation and SwitchesAccumulation Function Preparation Setting Parameters Operation and Performance Examples ExampleComparison Condition Comparator FunctionComparator Sign Function table Meaning and PurposeAccumulation function f6 Step If one Has Been selected, press Case Full/Dribble Batch Function Hold ComparatorFull/Dribble batch sub-function Parameter and display an item of the full/dribble Switch to display the HI Simple Batch Function Function Table Meaning and purpose Simple batch functionPreparation Setting Parameters Operation and Performance Examples Calibration Adjusting the Scale Gravity Acceleration Table Complete Calibration Procedure Gravity Acceleration CorrectionCalibration of the Zero Point Procedure for Setting Parameters Function Table15.2 Parameter List Display Meaning and purpose Function or full/dribble batch functionPrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Data Format FormatFormat Stream Mode Preparation and Performance ExamplesTare Command ModeCancel of tare Preset tare Upper limit valueFinal value Preparation Setting Parameters 17.1 RS-232C / Relay output / Buzzer OP-03 Pin connections Pin No Signal name Direction DescriptionOptions Pin No Signal name Direction Description 17.2 RS-422 / RS-485 / Relay output OP-04Installing OP-04 Communication Format Zero Lower limit valueAccumulation count output Reset of Accumulation data and numberAccumulation data output Final valueConsumables SpecificationInternal Printer for Type V OP-06 Disassembly InstallationPerformance Check Specifications HV-G seriesDimensions Page Repair MaintenanceCheck Points Before Calling Maintenance This situation Confirm these items
Top Page Image Contents