Polycom 9.0.6 manual Setting and Using Camera Presets

Page 14

Getting Started Guide for the VSX Series

Setting and Using Camera Presets

Camera presets are stored camera positions that you can create ahead of time or during a call.

Presets allow you to:

•Automatically point a camera at pre-defined locations in a room.

•Select a video source such as a VCR or DVD player, a document camera, or an auxiliary camera.

If your system’s camera supports electronic pan, tilt, and zoom movement, you can create up to 100 preset camera positions (0-99) for the near site. Each preset stores the camera number, its zoom level, and the direction it points (if appropriate). Near-site presets are available for VSX set-top and component systems. They remain in effect until you delete or change them.

If far-site camera control is allowed, you can create up to 16 presets (0-15) for the far-site camera. These presets are saved only for the duration of the call. You may also be able to use presets that were created at the far site to control the far-site camera.

To move the camera to a preset:

1. If a call is connected, press Near or Far, then choose a near-site or far-site camera.

2.Press a number on the remote control.

To view your near-site presets (VSX set-top and component systems):

Press Preset on the remote control.

Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions, and the gray icons indicate available presets.

To store a preset:

1. If you are in a call, press Near or Far, then choose a near-site or far-site camera or other video source.

2.If you selected a camera that supports electronic pan, tilt, and zoom, you can adjust the camera’s position:

—Press the arrow buttons on the remote control to move the camera up, down, to the left, or to the right.

—Press Zoom to zoom the camera out or in.

3.Press Preset on the remote control.

10	© Polycom, Inc.

Image 14

Contents Getting Started Guide for the VSX Series Trademark Information Contents Starting a Stream Viewing a Stream Using the Remote Control Getting Started Guide for the VSX SeriesVSX Series Remote Control Mute the sound you hear from the speakersPlacing a Video Call Calling and AnsweringAnswering a Video Call Calling from the Recent Calls List Ending a Video Call From You can call By dialing Types of Calls You Can MakePlacing Audio-only Calls and Adding Audio-only Sites Press Call on the remote control Ending an Audio-only Call Selecting and Adjusting a Camera or Other Video SourceControlling What You See Near or Focus the camera by turning the focus wheel Setting and Using Camera Presets Switching Between Full-Screen Video and the Home Screen Enabling Dual Monitor EmulationScroll to Dual Monitor Emulation and press Specifying When to Display the PIP Showing, Moving, and Turning Off the PIPEnabling Automatic Camera Tracking PowerCam Plus Only Select this setting To show the PIPMuting the Microphone Adjusting VolumeControlling What You Hear Muting the SpeakersEnjoying Stereo Audio in Video Calls Showing ContentShowing Content from a Computer Showing Content with People+Content IP Points to note about People+Content IPGraphics or Showing Content with a Visual Concert VSX or ImageShareResolution Refresh Rates Hz Showing Content from a Document Camera, VCR, or DVD Player Down Working with Directory EntriesSearching the Directory Adding, Editing, and Deleting Directory Entries This field Enter this informationCategorizing Directory Entries Select Edit GroupsRefreshing Global Directory Entries Placing a Multipoint Call Including Multiple Sites in CallsAbout Multipoint Calls Hosted by Lets you include Supports these callsSupplying a Password for Bridge Calls Systems with See this Setting DescriptionAbout Multipoint Viewing Modes Hosted by Allows chair control if Using Chair Control for Multipoint CallsClick Place a Call Temporarily Refusing Calls Changing the Way Calls Are AnsweredAuto Answer Multipoint Video , press Answering Calls AutomaticallyTo Auto Answer Point-to-Point Video , press Scroll to Mute Auto Answer Calls and press Scheduling CallsMuting Automatically Answered Calls Scroll to Far Control of Near Camera and press Customizing Your WorkspaceAllowing the Far Site to Control Your Camera Scroll to Keypad Audio Confirmation and press Displaying the Far Site’s Name When the Call ConnectsHearing Audio Confirmation When You Dial Scroll to Backlight Compensation and press Adjusting for Room LightingSetting Camera Brightness VSX 3000 Only Using Avaya Network Features with Video Calls Changing the System Color SchemeStreaming a Conference to the Web Starting a StreamViewing a Stream Click View a MeetingTo place a video call using the SoundStation VTX 1000 phone Ending a Call Using Your VSX 3000 System as a Computer Monitor Ending a Call with Audio-only ParticipantsBefore You Begin Tips for Great Video Video Conferencing TipsTips for Great Meetings Tips for Great AudioTips for Showing Content