Getting Started Guide for the VSX Series
2.Enter any additional information needed for the call. The available settings depend on the type of call and your system’s configuration. Not all calls require these settings:
—Call Quality – Specify the call rate (network speed) or call type for this call. For most calls, choose Auto to let the system determine the best quality for the call.
—Second ISDN number – Use two numbers only when the person you are calling instructs you to do so.
—Extension – If you need to dial an extension (E.164 address), enter the extension in the second entry field. If your system is not configured with a second entry field, you can enter the extension when the gateway prompts you. You can also specify characters in the dial string as instructed by the system administrator.
3.Press 
Call on the remote control to place the call.
Call progress indicators appear on the screen to show that the call is in progress. When the indicators turn green, the call is connected.
Calling from the Recent Calls List
You may be able to choose a number to call from a list of the sites you have called recently. The Recent Calls screen provides details of all incoming and outgoing calls, including the time of the calls.
To place a call from the Recent Calls screen:
1.Select Recent Calls from the Place a Call screen.
2.Scroll to the entry you want to call.
3.Press 
Call to place the call.
To see more details about a call listed on the Recent Calls screen, highlight the call
and press Help on the remote control.
You can sort the list by pressing the remote keys |
| Help and select |
Help to view sorting options. |
|
|
|
|
4 | © Polycom, Inc. |