RIDGID microEXPLORER Cleaning Instructions, Manually Saving Images to Your Computer’s Hard Drive

Page 17

microEXPLORERDigital Inspection Camera

Manually Saving Images to Your Computer’s Hard Drive.

1.Use the USB cable to connect the microEXPLORER inspection camera to the computer as shown in Figure 19.

2.Place the small side of the USB cable into the mini USB port in the micro- EXPLORER inspection camera (Figure 7), and the larger end into an open USB port in your computer.

3.Turn the microEXPLORER inspection camera’s power ON.

4.A splash screen saying “USB Connected” will appear on the microEXPLORER in- spection camera’s screen.

5.Click on the “My Computer” icon on your desktop.

Figure 28 – DCIM Folder

8. Open the 100SNAKE folder.

Figure 26 – My Computer Icon

6.Click on the new “Removable Storage Device”.

Figure 27 – Available Drive Window

NOTE! You may also delete content from the microEXPLORER inspection Camera from this screen. Use caution, as the contents will be permanently removed. The microEXPLORER inspection cam- era is equipped with internal storage but can be expanded by inserting an SD card. SD cards can be purchased from your local electronics retailer. When you insert an SD card, the de- vice will automatically configure the card and present an icon indicating that the card has been recognized and is ready for storage.

7. Open the DCIM folder.

Figure 29 100Snake Folder

9.Select the image you want by right click- ing on it and selecting copy from the drop-down menu.

Figure 30 - Image Window

10.Open a folder where you would like to save the image.

11.Right click in that folder and press paste.

Cleaning Instructions

WARNING

Remove batteries before cleaning.

Always clean the imager head and cable after use with mild soap or mild detergent.

Gently clean the LCD with a clean dry cloth. Avoid rubbing too hard on the LCD.

Ridge Tool Company

15

Image 17
Contents MicroEXPLORER Table of Contents MicroEXPLORER General Safety Information Safety SymbolsWork Area Safety Electrical SafetyPersonal Safety Specific Safety InformationService MicroEXPLORER Digital Inspection Camera SafetySpecifications Description Specifications Standard EquipmentDescription Standard EquipmentTo Remove or Install the Battery Pack Tool AssemblyLift and pull to remove cap when re- leased. Figure FCC StatementTo install an SD Card Installing the Imager Head CableTo Install Camera Accessories Buttons, Controls and PortsCheck work area for Adequate lighting Tool InspectionTool and Work Area Set-Up See sections on Controls, Icons and On Screen Navigation Operating InstructionsControls ControlsIcons On Screen Navigation Turn Up-Is-Up Self Leveling On or Off Change From Still Image Capture to VideoPan Capturing a still imageTransferring Images To a Computer Entering the Secondary Settings ScreenClick OK or next. The following screen will be displayed Following screen will be displayedManually Saving Images to Your Computer’s Hard Drive Cleaning InstructionsStorage Service and Repair Accessories30083 Imager Head 30203 MagnetBattery and Charger TroubleshootingBattery Pack/Battery Charger Safety Battery Charge SafetyCooling No Fan Battery & Charger SpecificationsAdequate lighting Charging Procedure/ Operating InstructionsIf present, remove battery from charger 30208 Charger DC Adapter 30198 74V Li-Ion Battery Pack Li-Ion Battery Charger Accessories Catalog DescriptionStorage DisposalCaméra d’inspection numérique Table des matières Installation et retrait du bloc-pilesConsignes générales de sécurité Symboles de sécuritéSécurité du chantier Sécurité électriqueSécurité individuelle Consignes de sécurité spécifiquesRévisions Utilisation et entretien des appareils électriquesCaractéristiques techniques Sécurité de la caméra d’inspection numérique microEXPLORERApplication AutonomieAvertissement FCC Équipements de baseMontage du câble de tête de caméra Retrait et installation du bloc- pilesAssemblage de l’appareil Touches, commandes et ports Montage des accessoires de caméraInstallation de carte mémoire Inspection de l’appareilExaminez les lieux pour Un éclairage suffisant Préparation de l’appareil et du chantier11. Éteignez la caméra Utilisation de l’appareil Icônes CommandesIcônes suite Navigation de l’écran Saisie d’une photo BalayageSaisie d’une vidéo Lecture et effacement des images sauvegardées« Menu » , puis appuyez sur la touche de sélection Transfert des images vers un ordinateurAccès à l’écran de programmation secondaire Fenêtre de copie de photos Ouvrez le fichier 100SNAKE Ouvrez le fichier DcimService après-vente et réparations AccessoiresConsignes de nettoyage StockagePiles et chargeur DépannageSécurité du bloc-piles et du chargeur Sécurité du chargeurCourant Caractéristiques techniques du chargeurUn éclairage suffisant Inspection et prépara- tion du chargeurAdaptateur CC pour chargeur Bloc-piles lithium/ion de 3,74 Méthode de chargement et consignes d’utilisationRecyclage Caméra d’inspection numérique microEXPLORER Cámara digital de inspección Información de seguridad general ÍndiceInformación de seguridad general Simbología de seguridadSeguridad en la zona de trabajo Seguridad eléctricaSeguridad personal Información de seguridad específicaUso y cuidado del aparato eléctrico ServicioSeguridad de la cámara digital de inspección microEXPLORER Descripción, especifica- ciones y equipo estándarDescripción EspecificacionesComunicado de la FCC Ensamblaje del aparatoEquipo estándar Instalación del cable del formador de imágenes Cómo sacar o instalar el bloque de pilasInstalación de los accesorios de la cámara Levante y extraiga la tapa. FiguraBotones de control, mandos y puertos Inspección del aparatoInstalación de la tarjeta de memoria SD Revise que la zona de trabajo Esté bien iluminada Preparación del aparato y de la zona de trabajoApague la cámara Lea la sección Botones de control, man- dos y puertos Instrucciones de funcionamientoÍconos ControlesIndicador de pila completamente cargada AparatoÍconos Navegación en pantalla Toma de una imagen fija Autonivelación vertical de la imagenToma de un video Revisar y eliminar imágenes guardadasIngreso a la pantalla de posiciones secundarias Transferencia de imá- genes a un computadorFigura 22 Cuadro donde seleccionar imágenes Abra la carpeta 100SNAKE Haga clic en Removable Storage De- viceAbra la carpeta Dcim Instrucciones de limpieza AccesoriosAlmacenaje Servicio y reparacionesCargador de pilas Detección de averíasSeguridad del bloque de pilas y del cargador Seguridad del cargador de la pilaSeguridad de la pila Descripción, especificaciones y equipo estándarEspecificaciones de la pila y del cargador Figura 32 Etiqueta en el cargador Inspección y preparación del cargadorLimpieza Instrucciones deInstrucciones de carga y funcionamiento AlmacenamientoEliminación de las pilas Cámara digital de inspección microEXPLORER E R S O N . C O N S I D E R I T S O L V E D

microEXPLORER specifications

The RIDGID microEXPLORER is a state-of-the-art inspection camera designed to provide users with a convenient and efficient way to visually inspect hard-to-reach areas. This cutting-edge tool leverages advanced imaging technology to deliver high-quality video and photos, making it an indispensable asset for professionals in plumbing, HVAC, electrical, and other maintenance fields.

One of the key features of the microEXPLORER is its 2.4-inch color LCD screen, which offers a bright, clear display for real-time viewing of inspection areas. The screen is designed to provide crisp images, ensuring that users can see details that may not be visible to the naked eye. The camera can capture and save images and video in both JPEG and AVI formats, allowing for easy documentation and sharing of findings with clients or team members.

The RIDGID microEXPLORER incorporates a 17mm camera head that is both compact and versatile. This design allows the camera to navigate tight spaces and various pipe sizes, making it ideal for plumbing inspections and HVAC applications. The camera head features an adjustable LED lighting system, ensuring that the inspection area is well-lit regardless of the surrounding lighting conditions. This functionality is crucial for obtaining clear images in dark or cramped spaces.

Equipped with a 3-foot flexible cable, the microEXPLORER can easily bend and maneuver through tight bends and curves, providing access to otherwise inaccessible areas. The cable's rigidity allows for precise positioning, enabling users to capture detailed footage from unique angles. The device's ergonomic design ensures that handling and operation are comfortable, reducing fatigue during extended use.

Another noteworthy aspect of the RIDGID microEXPLORER is its battery life. The device is powered by a rechargeable lithium-ion battery, offering significant usage time on a single charge. This long-lasting power source allows professionals to complete inspections without the interruption of frequent recharging.

In summary, the RIDGID microEXPLORER is a versatile inspection camera that combines portability, advanced imaging technology, and user-friendly features. Its compact design, high-resolution display, adjustable lighting, and flexible cable make it an essential tool for a variety of inspection tasks. Whether used for diagnosing plumbing issues, inspecting HVAC systems, or evaluating electrical components, the microEXPLORER enhances efficiency and accuracy in fieldwork, making it a valuable tool for professionals across multiple industries.