microEXPLORER™ Digital Inspection Camera
contain moving parts. This increases the
risk of entanglement injuries.
•Do not use this device for personal in- spection or medical use in any way: This is not a medical device. This could cause personal injury.
•Always use appropriate personal pro- tective equipment while handling and using the microEXPLORER inspection camera. Drains and other areas may con- tain chemicals, bacteria and other sub- stances that may be toxic, infectious, cause burns or other issues. Appropriate per- sonal protective equipment always in- cludes safety glasses and gloves, and may include equipment such as latex or rubber gloves, face shields, goggles, pro- tective clothing, respirators and steel toed footwear.
•Practice good hygiene. Use hot, soapy water to wash hands and other exposed body parts exposed to drain contents after handling or using the microEXPLORER inspection camera to inspect drains and other areas that may contain chemicals or bacteria. Do not eat or smoke while op- erating or handling the microEXPLORER inspection camera. This will help prevent contamination with toxic or infectious ma- terial.
•Do not operate the microEXPLORER inspection camera if operator or de- vice is standing in water. Operating an electrical device while in water increases the risk of electrical shock.
Description,
Specifications and
Standard Equipment
Description
The microEXPLORER inspection camera is a powerful handheld video inspection system. It is a completely digital platform that allows you to perform and record pictures and videos of visual inspections in hard to reach areas. Several image manipulation features such as self leveling, pan, zoom and low light vision are built into the system to ensure detailed and accurate visual inspections. Accessories (mirror, hook and magnet) are included to at- tach to the imager head to provide application flexibility.
Specifications
Recommended Use | ...Indoor |
Viewable Distance | 1" to 12" |
| (2.5 cm – 30 cm) |
Power Supply | Rechargeable |
| Lithium Ion Battery |
| Pack (3.7 Volt) |
Estimated Battery Life ..3-4 hours of continuous use
Weight | 2.5 lbs (1.3 kg) |
Dimensions: | |
Length | 10.5" (26.7 cm) |
Width | 4.13" (10.5 cm) |
Height | 2.38" (6.00 cm) |
Display: | |
Resolution | 320 x 240 RGB |
Screen Type | 3.5" TFT LCD |
Operating Environment: |
Temperature | 32°F to 113°F |
| (0°C to 45°C) |
Humidity | 5% to 95% non-con- |
| densing (display unit) |
Storage Temperature... | -4°F to 158°F |
| (-20°C to 70°C) |
Water Resistance | Imager head and |
| cable (When prop- |
| erly assembled.) |
Cable Length | 3' |
JPG Image Resolution |
Best | 1024 x 1280 |
Good | 640 x 480 |
Video Resolution | 320 x 240 |
Memory | 6 MB Internal |
| Memory. SD Card |
| Slot provided for ad- |
| ditional memory (SD |
| Card not included) |
Computer Interface ...USB (Cord
Included)
Standard Equipment
The microEXPLORER inspection camera comes with the following items:
MicroEXPLORER
Table of Contents
MicroEXPLORER
Work Area Safety
Safety Symbols
General Safety Information
Electrical Safety
Service
Specific Safety Information
Personal Safety
MicroEXPLORER Digital Inspection Camera Safety
Description
Description Specifications Standard Equipment
Specifications
Standard Equipment
Lift and pull to remove cap when re- leased. Figure
Tool Assembly
To Remove or Install the Battery Pack
FCC Statement
To Install Camera Accessories
Installing the Imager Head Cable
To install an SD Card
Buttons, Controls and Ports
Tool Inspection
Tool and Work Area Set-Up
Check work area for Adequate lighting
Operating Instructions
See sections on Controls, Icons and On Screen Navigation
Controls
Controls
Icons
On Screen Navigation
Pan
Change From Still Image Capture to Video
Turn Up-Is-Up Self Leveling On or Off
Capturing a still image
Entering the Secondary Settings Screen
Transferring Images To a Computer
Following screen will be displayed
Click OK or next. The following screen will be displayed
Cleaning Instructions
Manually Saving Images to Your Computer’s Hard Drive
30083 Imager Head 30203
Accessories
Storage Service and Repair
Magnet
Battery Pack/Battery Charger Safety
Troubleshooting
Battery and Charger
Battery Charge Safety
Battery & Charger Specifications
Cooling No Fan
Charging Procedure/ Operating Instructions
If present, remove battery from charger
Adequate lighting
Storage
Li-Ion Battery Charger Accessories Catalog Description
30208 Charger DC Adapter 30198 74V Li-Ion Battery Pack
Disposal
Caméra d’inspection numérique
Installation et retrait du bloc-piles
Table des matières
Sécurité du chantier
Symboles de sécurité
Consignes générales de sécurité
Sécurité électrique
Révisions
Consignes de sécurité spécifiques
Sécurité individuelle
Utilisation et entretien des appareils électriques
Application
Sécurité de la caméra d’inspection numérique microEXPLORER
Caractéristiques techniques
Autonomie
Équipements de base
Avertissement FCC
Retrait et installation du bloc- piles
Assemblage de l’appareil
Montage du câble de tête de caméra
Installation de carte mémoire
Montage des accessoires de caméra
Touches, commandes et ports
Inspection de l’appareil
Préparation de l’appareil et du chantier
11. Éteignez la caméra
Examinez les lieux pour Un éclairage suffisant
Utilisation de l’appareil
Commandes
Icônes
Icônes suite
Navigation de l’écran
Saisie d’une vidéo
Balayage
Saisie d’une photo
Lecture et effacement des images sauvegardées
Transfert des images vers un ordinateur
Accès à l’écran de programmation secondaire
« Menu » , puis appuyez sur la touche de sélection
Fenêtre de copie de photos
Ouvrez le fichier Dcim
Ouvrez le fichier 100SNAKE
Consignes de nettoyage
Accessoires
Service après-vente et réparations
Stockage
Sécurité du bloc-piles et du chargeur
Dépannage
Piles et chargeur
Sécurité du chargeur
Caractéristiques techniques du chargeur
Courant
Inspection et prépara- tion du chargeur
Un éclairage suffisant
Méthode de chargement et consignes d’utilisation
Adaptateur CC pour chargeur Bloc-piles lithium/ion de 3,74
Recyclage
Caméra d’inspection numérique microEXPLORER
Cámara digital de inspección
Índice
Información de seguridad general
Seguridad en la zona de trabajo
Simbología de seguridad
Información de seguridad general
Seguridad eléctrica
Uso y cuidado del aparato eléctrico
Información de seguridad específica
Seguridad personal
Servicio
Descripción
Descripción, especifica- ciones y equipo estándar
Seguridad de la cámara digital de inspección microEXPLORER
Especificaciones
Ensamblaje del aparato
Equipo estándar
Comunicado de la FCC
Instalación de los accesorios de la cámara
Cómo sacar o instalar el bloque de pilas
Instalación del cable del formador de imágenes
Levante y extraiga la tapa. Figura
Inspección del aparato
Instalación de la tarjeta de memoria SD
Botones de control, mandos y puertos
Preparación del aparato y de la zona de trabajo
Apague la cámara
Revise que la zona de trabajo Esté bien iluminada
Instrucciones de funcionamiento
Lea la sección Botones de control, man- dos y puertos
Indicador de pila completamente cargada
Controles
Íconos
Aparato
Íconos
Navegación en pantalla
Toma de un video
Autonivelación vertical de la imagen
Toma de una imagen fija
Revisar y eliminar imágenes guardadas
Transferencia de imá- genes a un computador
Ingreso a la pantalla de posiciones secundarias
Figura 22 Cuadro donde seleccionar imágenes
Haga clic en Removable Storage De- vice
Abra la carpeta Dcim
Abra la carpeta 100SNAKE
Almacenaje
Accesorios
Instrucciones de limpieza
Servicio y reparaciones
Seguridad del bloque de pilas y del cargador
Detección de averías
Cargador de pilas
Seguridad del cargador de la pila
Descripción, especificaciones y equipo estándar
Especificaciones de la pila y del cargador
Seguridad de la pila
Inspección y preparación del cargador
Figura 32 Etiqueta en el cargador
Instrucciones de carga y funcionamiento
Instrucciones de
Limpieza
Almacenamiento
Eliminación de las pilas
Cámara digital de inspección microEXPLORER
E R S O N . C O N S I D E R I T S O L V E D