Advanced Printing
About “Paper Size” and “Paper Type”
To change the paper size or paper type, operate from the camera to select the PictBridge print setup mode and confirm or check the settings.
By default, 4"×6" is selected in “Paper Size” and “Photo “(Photo Paper Plus Glossy) is selected in “Paper Type” for this printer. To use Photo Paper Pro, select “Fast Photo” in “Paper type”.
If using a Canon
“Paper Size” setting | “Paper Type” setting | Paper loaded in printer | |
4"×6" (Default) | Photo (Default) | Photo Paper Plus Glossy | |
|
|
| |
| Fast Photo | Photo Paper Pro | |
|
|
| |
8.5"×11" (Letter) | Photo | Photo Paper Plus Glossy | |
|
|
| |
| Fast Photo | Photo Paper Pro | |
|
|
| |
5"×7" | Photo | Photo Paper Plus Glossy | |
|
|
|
About “Image optimize”
If you use a Canon
Note When "VIVID" is selected, green and blue portions of photos are printed vividly.
When "NR" (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed.
When "VIVID+NR" is selected, functions of both "VIVID" and "NR" are performed.
About “Date print”
If “On” is selected, the shooting date recorded in Exif image data is printed on the
Note This printer can handle only Exif/JPEG image data to produce photos using PictBridge.
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the digital camera and printer, follow the instructions given in the Instruction Manual of Camera.
Controls of the digital camera cannot be used for the following:
-Print quality setting
-Printer maintenance
18