Canon P-I9900-QSG-1203 quick start Close to a heating source, Purchased the printer, Service

Appendix

Caution You may cause injury or damage the printer if you ignore any of these safety precautions.

Choosing a location	Do not install the printer in a location that is unstable or subject to excessive vibration.
	Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or
	close to a heating source.
	To avoid the risk of fire or electric shocks, install the printer in a location with an ambient
	temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
	Do not place the printer on a thick rug or carpet.
	When moving the printer, carry the printer at both ends.
Power supply	Ensure that the area around the power outlet is kept clear at all times so you
	can easily unplug the power cord if necessary.
	Never remove the plug by pulling on the cord.
	Do not use an extension lead/ cord.
	Never use a power supply source other than the one rated for the printer in the country where you
	purchased the printer.
	AC 100-127 V, 50/60 Hz
	AC 220-240 V, 50/60 Hz
Working around the	Never put your hands or fingers in the printer while it is printing.
printer	Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol,
	thinners, etc.) on top of the printer.
	If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for
	service.
Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children.
	If a child ingests any ink, consult a doctor immediately.
	Do not shake print heads or ink tanks.
	Ink may leak out and stain clothing or the surrounding area.
	Never touch the electrical contacts on a print head after printing.
	The metal parts may be very hot and could cause burns.

81