Trouble check
Others | Cause and/or corrective actions | |
| ||
Symptom | • COMMANDER is set to OFF in the menu system. | |
The supplied Remote Commander does | m Set it to ON. (p. 32) | |
• Something is blocking the infrared rays. | ||
not work. | ||
m Remove the obstacle. | ||
| ||
| • The battery is not inserted with the correct polarity. | |
| m Insert the battery with the correct polarity. (p. 113) | |
| • The batteries are dead. | |
| m Insert new ones. (p. 113) | |
| • The camcorder is not malfunctioning. | |
The CHARGE lamp flashes after you |
| |
charge the battery pack installed in the |
| |
camcorder. | • Disconnect the connection plug on the battery pack or | |
No function works though the power is | on the AC power adaptor, then reconnect it in about 1 | |
minute. Turn the power on. If the functions still do | ||
on. | ||
not work, press the RESET button on the back of the | ||
| ||
| battery compatment lid using a | |
| (If you press the RESET button, all the settings | |
| including the date and time return to the default.) | |
|
|
AC power adaptor
| Corrective actions |
Symptom | • Disconnect the mains lead. After about 1 minute, |
The VTR/CAMERA or CHARGE lamp | reconnect the mains lead. (p. 7) |
| |
does not light. | • See the chart on the next page. |
The CHARGE lamp flashes. |
|
|
|
98