JVC GR-DVL9600 specifications 32 EN, Picture Wipe or Dissolve Selection

32EN

RECORDING

AdvancedFeatures(cont.)

PICTURE WIPE OR DISSOLVE SELECTION

( , , , , , and

)

Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture Wipe effects and 1 Dissolve effect. The Picture Wipe or Dissolve works when recording is started.

Before the following steps, perform steps 1 through 4 on pg. 31.

Recording Start/Stop Button

Previous scene end

[Ex.: WIPE – SCROLL]

Within 5 minutes . . .

Wipe-in

5 STORE SCENE IN MEMORY Engage the Record-Standby mode.

If you select Picture Wipe/Dissolve during recording . . .

.... press the Recording Start/Stop Button when one

scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during Record- Standby mode . . .

.... press the Recording Start/Stop Button to start

recording and press it again when one scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during Record- Standby mode after performing a Picture Wipe/ Dissolve . . .

.... the point at which the scene ended is already

stored in memory.

6 START RECORDING

If you start recording a new scene within 5 minutes of the end of the previous recording (without having turned the camcorder’s power off), the previous scene wipes out, revealing the new scene.

NOTES:

●You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/Stop Button.

●If the power is turned off after a scene is finished recording, the stored point is erased.

This disables the Picture Wipe/Dissolve combination. When this happens, the Picture Wipe/Dissolve indicator blinks. Try recording again, but do not turn the power off when you are finished. Please be advised that power also shuts off automatically if 5 minutes elapse in the Record-Standby mode.

●The sound at the end of the last recorded scene is not stored.

●When “DIS” is set to “ON” (☞ pg. 29), Picture Wipe/ Dissolve is disabled.