JVC GR-DVL9600 specifications Play 4 Button, Select Menu Remote sensor, Effect

PLAY (4) Button

			PL
			A
PLAYBACK EFFECT			Y
			F
			O
			F
4OFF		CLASSIC FILM	5S
1
2	B/W	MONOTONE
3		SEPIA
4		STROBE	Power Switch
5		VIDEO ECHO

PLAYBACK EFFECT

Select Menu

Remote sensor

EN57

FEATURE: Playback Special Effects

PURPOSE:

To allow you to add creative effects to the playback image. You can use any one of the 5 effects.

OPERATION:

1)To start playback, press PLAY (4).

2)Point the remote control at the camcorder's remote sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3)Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.

■To deactivate the selected effect, press EFFECT ON/ OFF on the remote control. Pressing it again re- activates the selected effect.

■To change the selected effect, repeat from step 2 of the above “OPERATION”.

NOTES:

●When Playback Special Effects are used, the Multi-

Analyser 4 and Multi-Analyser 9 Snapshot modes (☞ pg. 25) are not available.

●For images recorded in High Speed Recording mode, “CLASSIC FILM”, “STROBE” and “VIDEO ECHO” are disabled.

●The effects that can be used during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The effects work the same in playback as they did in recording. Refer to page 35 for more information.

T W

PLAY

EFFECT

EFFECT ON/OFF

RM-V711U (provided)