STOP (5) Button
Remote sensor
PLAY/PAUSE (6/4) Button
| Power lamp |
| PL |
| A |
| Y |
| O |
| F |
| F |
| 5S |
HIGH SPEED Button | Lock Button |
| |
Display | Power Switch |
| |
WIDE4 | Wide mode |
| Playback of |
| image recorded |
| in High Speed |
| Recording mode |
64 | |
WIDE | with Wide mode |
| |
| Played back in |
| the centre of the |
| screen |
64 | |
ZOOM | with Zoom mode |
| |
| Magnified to fill |
| the screen |
T W
SLOW Rewind/
Forward Button
PLAY
PAUSE
EN45
Progressive Slow-Motion Playback
Images recorded in High Speed Recording mode will offer less blur than normal images when played back in
1 SELECT OPERATION MODE
Set the Power Switch to “ ” while pressing down the Lock Button located on the switch.
2 FIND SCENE OF INTEREST
Press PLAY (4).
•When the portion recorded in High Speed Recording mode is played back, a black band appears at the top and bottom of the screen, and the recorded image is displayed in the centre of the screen.
3 SELECT MODE
Press HIGH SPEED on the camcorder. By pressing it, the screen is switched as follows:
To Search In Rewind Or Forward . . .
..... press SLOW (9) on the remote control to view
reverse
•To protect the video heads, Progressive
4 END PLAYBACK
Press STOP (5).
NOTES:
●Progressive
●In
●If images recorded in High Speed Recording mode are played back in a video unit other than this camcorder, the screen will appear divided into 2, and the images are displayed both in the upper and lower halves of the screen.
●Since in
●If a tape recorded in High Speed Recording mode is dubbed between 2 video units which are not
●During Progressive
functions are disabled: “CLASSIC FILM”, “STROBE” and “VIDEO ECHO” of Playback Special Effects (☞ pg. 57).
●If the tape reaches a portion which was not recorded in High Speed Recording mode during Progressive
●During Progressive
●During reverse search of Progressive
●When “HIGH SPEED” is displayed: To make the indications disappear from the connected TV monitor, press DISPLAY on the remote control. To make the indications disappear from the LCD monitor, press IND. ON/OFF on the camcorder.