JVC GR-DVL9600 specifications 34 EN, Program AE With Special Effects, Select Mode, Disable Mode

34EN

RECORDINGAdvancedFeatures(cont.)

Program AE With Special Effects

Power lamp

		F
	F
Y	O		5S
A
L
P

Lock Button

Select Dial Power Switch

Display

IMPORTANT:

If certain Fades or Wipes (☞ pg. 33) are activated, some modes of Program AE with special effects cannot be used. If you select a mode that is unusable in the current situation, the mode’s symbol blinks.

You can choose any one of the effects from the P.AE/ EFFECT Menu.

1 SELECT OPERATION MODE

Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, and pull out the viewfinder fully or open the LCD monitor fully.

2 ACCESS MANUAL MODE ITEM MENU Press the Select Dial. The Manual Mode Item Menu appears.

3 ACCESS “P.AE/EFFECT” SELECT MENU Rotate the Select Dial to move the highlight bar to “P.AE/EFFECT”, then press it.

FOCUS	AUTO
EXPOSURE	AUTO
W. BALANCE AUTO
FADER	OFF
/ WIPE
4P. AE	OFF
/ EFFECT
FLASH ADJ.	0
END
P. AE / EFFECT
	TWILIGHT
	SEPIA
B/W	MONOTONE

SEL. 4 CLASSIC FILM

STROBE

1 SLOW 4X 2 SLOW 10X

PAUSE

Manual Mode Item Menu

P.AE/EFFECT Menu

4 SELECT MODE

Move the highlight bar to the desired mode by rotating the Select Dial, then press it.

•The P.AE/EFFECT Menu disappears and the selected mode is activated. The symbol of the selected mode appears.

5 DISABLE MODE

To turn off the selected mode, re-access the P.AE/ EFFECT Menu and move the highlight bar to “OFF” by rotating the Select Dial. Then press it.

NOTES:

●Program AE with special effects can be changed during recording or during Record-Standby.

●When “DIS” is set to “ON”, “VIDEO ECHO” is disabled.

●Even if you set “DIS” to “ON” (☞ pg. 29) with “CLASSIC FILM”, “STROBE” or “SLOW” activated, “DIS” will be disabled.

The indicator for the selected mode appears, and the selected mode is engaged.