JVC GR-DVL9600 LCD Monitor/Viewfinder Indications During Playback, Indications Function

EN75

LCD Monitor/Viewfinder Indications During Playback

12 3 4 5 6

32kHz SOUND1	LP 4
	PS WIDE

			HIGH SPEED		25 . 12	. 99
		TC 01 : 28 : 15
					16	: 40
	VOLUME			– – – – –6– – – – –
9			8			7

No.		Function
1	Displays the sound mode.		(☞ pg. 41)
2	Appears when playing back images recorded in
	High Speed Recording mode.		(☞ pg. 45)
3	Displays playback of images recorded in
	Progressive mode.		(☞ pg. 22)
4	Displays the recording mode.
5	Appears while a tape is running.
	4	: Playback
	3 : Fast-Forward/Shuttle search
	2 : Rewind/Shuttle search
	6	: Pause
	64 : Forward slow-motion
	16 : Reverse slow-motion
	e	: Audio Dubbing
6	During playback of image recorded in High
	Speed Recording mode, the screen mode
	(Zoom or Wide) is displayed.		(☞ pg. 45)
7	Displays the date/time.		(☞ pg. 41)
8	BRIGHT: Displays the brightness of the LCD
		monitor or the viewfinder. (☞ pg. 17)
	VOLUME: Displays the speaker or headphone
		volume.	(☞ pg. 43)
9	Displays the time code.		(☞ pg. 41)

Warning Indications

Indications		Function
	Displays the battery remaining power.
	Remaining power level: high
	Remaining power level: exhausted
	As the battery power comes close to nil, the battery indicator		blinks. When the
	battery power is exhausted, power turns off automatically.
	Appears when no tape is loaded, or when the erase protection tab is set to
	“SAVE”.		(☞ pg. 9)
	Appears if dirt is detected on the heads during recording.		(☞ pg. 79)
	Appears if condensation occurs. When this indication is displayed, the camcorder
	turns off automatically.
TAPE!	Appears for 10 seconds after power is turned on if there is no tape loaded.
TAPE END	Appears when the tape ends during recording or playback.		(☞ pg. 15)
SET DATE/TIME!	● Appears when the date/time is not set.		(☞ pg. 8)
	● Appears when the clock (lithium) battery is discharged and the previously set
	date/time is erased.		(☞ pg. 8)
ERROR!	Appears when Audio Dubbing or Insert Editing is unavailable.		(☞ pg. 64, 65)
REFER MANUAL
	The error indications (E01 — E06) show what type of malfunction has occured.
	When an error indication appears, the camcorder turns off automatically. Remove
E01 — E06	the power supply (battery, etc.) and wait a few minutes for the indication to clear.
	When it does, you can resume using the camcorder. If the indication remains,
	consult your nearest JVC dealer.		(☞ pg. 70)