JVC GR-DVL9600 specifications Connection To a Video Unit Equipped With a DV Connector

CONFIRM POWER-OFF STATUS Make sure all the units are turned off.

EN51

PUSH-OPEN Button

Connection To A Video Unit Equipped With A DV Connector

Connection to the Digital Printer GV-DT3 (optional) allows you to print out the images or to transfer the captured image from the Digital Printer to a personal computer. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing (☞ pg. 53), which offers virtually no image or sound deterioration.

To DV IN/OUT

Core filter

DV cable (optional)

	Core filter
To DV IN	To DV
connector	connector
	Video unit equipped
	with a DV input
	connector
	To PC
	connector
Digital Printer	PC
	connection
	cable

1

2 CONNECT CAMCORDER TO PRINTER OR VIDEO UNIT EQUIPPED WITH DV INPUT CONNECTOR

Press PUSH-OPENand open the LCD monitor fully. Make connections to the device you want to connect to using the DV cable, as shown in the illustration.

3 CONNECT PRINTER TO PC (IF NECESSARY)

Connect a PC connection cable to the printer’s PC connector and the PC’s RS-232C connector.

4 TURN ON POWER

Turn the camcorder's Power Switch to “ ”, “ ” or “ ” while pressing down the Lock Button located on the switch and turn on the other units.

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (☞ pg. 7).

●For Digital Dubbing, this camcorder can be connected

only to one device at a time. This camcorder can also be used as a recorder (☞ pg. 53).

●Also refer to the instruction manuals of the connected units.

●Be sure to use a DV cable with the core filter.

●Be sure to wind the DV cable twice around the core filter attached to the end connected to the camcorder.

To RS-232C

PC