JVC GR-DVL9600 specifications 46 EN, Playback Menu, Close Menu

46EN

Power Switch

PLAYBACK

Playback Menu

AdvancedFeatures

Power lamp

PLA

Y

O
F	Lock Button
F

5S

MENU Button

			Select Dial
		Display
				FULL SOUND
				SOUND1			FULL SOUND
				SOUND2
	48kHz MODE		FULL SOUND
	32kHz MODE		SOUND1				SOUND1
	SYNCHRO		0 . 0		ON		SOUND2
	DISPLAY		ON
4	TIMECODE		OFF		OFF	ON
	END					OFF

The Playback Menu allows you to set the following functions:

Playback Sound (32 kHz, 48 kHz), Synchro Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (☞ pg. 62, 63).

1 SELECT OPERATION MODE

Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and pull out the viewfinder fully or open the LCD monitor fully.

2 ACCESS PLAYBACK MENU Press MENU. The Playback Menu appears.

3 SELECT FUNCTION

Move the highlight bar to the desired function by rotating the Select Dial. Press the Select Dial to activate.

4 SET FUNCTION PARAMETERS

Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press the Select Dial, and the highlight bar automatically moves to “END”.

•To set parameters for other functions, repeat steps 3 and 4.

5 CLOSE MENU

Press the Select Dial again, and the menu disappears.

Playback Menu

4	48kHz MODE	FULL SOUND
	32kHz MODE	SOUND1
	SYNCHRO	0 . 0
	DISPLAY	ON
	TIMECODE	OFF
	END