JVC GR-DVL9600 specifications 68 EN, Troubleshooting

68EN

TROUBLESHOOTING(cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
20. The Picture Wipe and Dissolve	20. • The last selected editing scene is	20. • Select Picture Wipe or Dissolve
functions do not work.	ending.	before beginning recording. The
	• At the end of the last selected	effects are then automatically
	scene for editing, the Power	activated (☞ pg. 32).
	Switch was set to “OFF”.	• Do not turn off the camcorder’s
	• The power is off.	power after setting Edit-In and
		Edit-Out points, as they will all
		be erased (☞ pg. 32).
		• The camcorder automatically
		shuts off after 5 minutes have
		elapsed in the Record-Standby
		mode. Make sure you continue
		operations within 5 minutes
		after engaging Record-Standby
		mode (☞ pg. 32).
21. The Picture Wipe function	21. • The Slow Shutter mode is	21. • Make sure the Squeeze mode,
does not work.	activated.	Cinema mode, or Slow Shutter
	• The Squeeze or Cinema mode is	mode is not activated when
	selected in the Recording Menu.	preparing to use the Picture
		Wipe function (☞ pg. 29, 35).
22. Scene transition does not go as	22. • When using “Picture Wipe/	22.
expected.	Dissolve” (☞ pg. 32) or
	“Dissolve during 5 second
	mode recording” (☞ pg. 21),
	there is a delay of a fraction of a
	second between the previous	————
	record stop-point and the
	Dissolve start-point. This is
	normal, but this slight delay
	becomes especially noticeable
	when shooting fast-moving
	subject or during rapid panning.
23. The Video Echo mode does	23. • The Picture Wipe or Dissolve	23. • Make sure the Squeeze mode is
not work.	functions are in use.	set to “OFF” (☞ pg. 33).
	• The Squeeze mode is selected in	• Do not try to use the Video
	the Recording Menu.	Echo mode during a Fade-In or
	• A Fade-In or Fade-Out is in	Fade-Out or when Dissolve is
	progress (White Fader, Black	activated during 5-second mode
	Fader or Black & White Fader).	recording (☞ pg. 31).
	• Dissolve during 5-second mode
	recording is in use.
24. Even when Slow Shutter is not	24. • When shooting in the dark, the	24. • If you want the lighting to look
selected, the image looks like	unit becomes highly sensitive to	more natural, set GAIN UP to
it is activated.	light and the image takes on an	“AGC” or “OFF” in the
	effect similar to Slow Shutter.	Recording Menu (☞ pg. 29).
25. There is no strobe when the	25. • The Picture Wipe or Dissolve	25. • Do not try to use the Classic
Classic Film or Strobe mode is	function is in use.	Film or Strobe mode during a
activated.	• Dissolve during 5-second mode	scene transition (☞ pg. 21, 31,
	recording is in use.	32).
26. White Balance cannot be	26. • The Sepia or Monotone mode is	26. • Turn off Sepia or Monotone
activated.	activated.	before setting White Balance
		(☞ pg. 34).
27. When shooting a subject	27. • This is a result of exceedingly	27.
illuminated by bright light,	high contrast, and is not a	————
vertical lines appear.	malfunction.
28. When the screen is under	28. • This is not a malfunction.	28.
direct sunlight during shooting,		————
the screen becomes red or
black for an instant.