42 EN, High Speed Recording, END Recording | JVC GR-DVL9600 specification

42EN

RECORDING

AdvancedFeatures(cont.)

Power lamp

		F
	F
Y	O		5S
Y
A
L
P

Lock Button

Recording Start/Stop Button

Power Switch

HIGH SPEED Button

Display

(LCD monitor or viewfinder)

Normal Record-

PAUSE Standby

	High Speed
PAUSE	Recording Standby
HIGH SPEED
REC	High Speed
444	Recording
HIGH SPEED
	Playback of image
	recorded in High
	Speed Recording
	mode on this
	camcorder’s display
	When connected to
	a monitor or played
	back on a video
	unit other than
	GR-DVL9600

High Speed Recording

Records 100 frames per second. The images recorded in High Speed Recording mode can be played back with high density in slow-motion. This feature is an effective way to capture fast-moving action. Also refer to “Progres- sive Slow-Motion Playback” on pg. 45.

1 SELECT OPERATION MODE

Set the Power Switch to “ ” while pressing down the Lock Button, and pull out the viewfinder fully or open the LCD monitor fully.

2 ENGAGE HIGH SPEED RECORDING STANDBY

Press HIGH SPEED while in the Record-Standby mode.

•“HIGH SPEED” is displayed.

3 START RECORDING

Press the Recording Start/Stop Button.

•The tally lamp lights.

•Snapshot recording (☞ pg. 24) is disabled during High Speed Recording.

4 END RECORDING

Press the Recording Start/Stop Button.

•Record-Standby mode is engaged.

•To release the High Speed Recording mode, press

HIGH SPEED.

NOTES:

●During High Speed Recording, the image appears in the upper half of the camcorder’s display as shown in the illustration. While the camcorder is connected to a monitor (using S-Video output, AV OUT, DV OUT), the screen is divided into 2 and the image is displayed both in the upper and lower halves of the monitor as shown in the illustration.

●If shooting is attempted under a fluorescent lamp, the screen may jitter.

●It is possible to copy scenes recorded in High Speed Recording mode from this camcorder only to another GR-DVL9600.

●During High Speed Recording, the following functions are

disabled: Fade/Wipe effect other than “WHITE”, “BLACK” and “B.W” (☞ pg. 33), Program AE with special effects

other than “TWILIGHT”, “SEPIA”, “MONOTONE” and “SHUTTER” (☞ pg. 35), “DIS” (☞ pg. 29), Snapshot (☞ pg. 24) and Digital Zoom (☞ pg. 29).

●If zooming is attempted during High Speed Recording, the image may become slightly blurred.

●The playback area for images recorded in High Speed Recording mode is half the height of the screen. If images recorded in High Speed Recording mode are played back on a video unit other than GR-DVL9600, the screen will appear divided into 2, and the images will be displayed both in the upper and lower halves of the screen.

●When editing with JLIP Video Producer (provided software), Playback Special Effects and Fade/Wipe effects do not function properly in images recorded in High Speed Recording mode.