Sony BRC-Z330 Color Menu, White Balance white balance mode, To set the Color AE

Page 24

Adjusting and Setting With Menus

The COLOR AE feature is available only when MODE (exposure mode) is set to any item other than

MANUAL.

OFF: COLOR AE does not function.

CHECK: The region of the color specified with PHASE is displayed in white. The region is set to STD when CHECK is selected.

WIDE: The region of the color specified with PHASE becomes wide.

STD: The region of the color specified with PHASE is that between NARROW and WIDE.

NARROW: The region of the color specified with PHASE becomes narrow.

When an item other than OFF is selected, PHASE is displayed, and you can specify the color for which the exposure is automatically adjusted. The adjustable range is from 0 to 71.

To set the COLOR AE

1 Set COLOR AE to CHECK.

2 Select PHASE to adjust so that the color region in which the exposure is automatically adjusted is displayed in white.

3 Set COLOR AE to NARROW, STD, or WIDE.

Note

You cannot store the status when CHECK is selected in the preset memory of the camera.

ND FILTER

Select the filtering level of the camera’s built-in ND FILTER.

Select from among OFF, 1/4, and 1/16.

OFF: ND FILTER does not function.

1/4: Decrease the amount of light by 1/4.

1/16: Decrease the amount of light by 1/16.

Note

If you switch the ND FILTER during shooting, camera image may be distorted.

COLOR Menu

The COLOR menu is used to adjust the white balance and the color.

<COLOR>

 

 

>WHITE

BALANCE

AUTO1

WB

SENS

MID

WB

R.SHIFT

0

WB

B.SHIFT

0

COLOR

GAIN

0

COLOR

HUE

0

COLOR

MATRIX

ON

R.ENHANCE

0

G.ENHANCE

0

B.ENHANCE

0

YL.ENHANCE

0

CY.ENHANCE

0

MG.ENHANCE

0

 

 

 

 

WHITE BALANCE (white balance mode)

Select the white balance mode from among the following:

AUTO1, AUTO2, INDOOR, OUTDOOR, ONE PUSH,

MANUAL

AUTO1: Adjusts the white balance automatically while leaving natural colors.

AUTO2: Adjusts the white balance automatically.

INDOOR: The R.GAIN and B.GAIN values are fixed to those for a color temperature of 3200K.

OUTDOOR: The R.GAIN and B.GAIN values are fixed to those for a color temperature of 5800K.

ONE PUSH: The white balance adjustment is activated when you zoom in on a white object in the center of the screen and press the HOME button on the supplied Remote Commander, or press the button on the top of the joystick or the ONE PUSH AWB button on the RM-BR300 Remote Control Unit.

MANUAL: Adjusts the white balance manually.

When you select any mode of WHITE BALANCE, some of the following setting items that are required for the selected mode appear.

WB SENS: You can adjust the speed with which the color of an object is put close to white balance focusing point in AUTO1 or AUTO2 mode. Set to HIGH to do so at higher speed and to LOW to do so at lower speed.

You can also adjust the red or blue tint when shooting an object under reddish light sources such as an incandescent light and candle, or under bluish light sources such as the shade. Selecting HIGH decreases red or blue tint, and selecting LOW increases red or blue tint.

WB R.SHIFT, WB B.SHIFT: You can shift the white balance focusing point in automatic white balance mode to your favorite red tint (WB R.SHIFT) or blue tint (WB B.SHIFT) individually. The adjustable range of each item is from –7 to +7.

24

COLOR Menu

Page 23 Page 25
Image 24
Page 23 Page 25
Contents HD Color Video Camera Owner’s Record For the customers in the U.S.AFor the customers in Canada For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions White flecks AliasingFocal plane FlickerFeatures Supplied Components and Accessories Camera MPA-AC1 AC power adaptor Sony AC power cordRemote commander Ceiling bracket a Ceiling bracket B Wire ropeBRS-200 Remote Camera Operating Switcher Optional ProductsBRBK-HD2 HD-SDI Output Card System Configuration System configurationThis system allows you Overview System Configuration BRBK-HD2 Location and Function of Parts CameraFront RearSetting of the Bottom switches BottomRemote Commander supplied RM-BR300 Remote Control Unit not supplied Installing batteriesLock button and indicator Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedMode selector Visca RS-232C connectorVisca RS-422 connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedSetting Menus About On-Screen MenusMain Menu Menu Operation Using the Supplied Remote Commander Operation Through MenusTo return to the main menu To return to the normal display4,5 Mode exposure mode For the 1080/59.94i or 720/59.94P signal formatExposure Menu EX-COMP exposure compensationWhite Balance white balance mode Color MenuTo set the Color AE Picture Menu To set the Color DetailBlack and white mode Mode focus modeFocus Menu AF Assist auto focus assistSetting range of PAN LEFT/PAN Right Setting range of Tilt DOWN/TILT UPPAN Tilt Zoom Menu Zoom digital zoomIR-RECEIVE infrared signal reception System MenuIMG-FLIP image flip Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderPan/Tilt and Zoom Operation Panning and TiltingTo face the camera back to the front If you accidentally move the camera with your handAdjusting the Camera Operating Multiple Cameras with the Remote CommanderFocusing on a Subject ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo assign camera addresses automatically To assign camera addresses manuallyTo set a limit on the maximum panning/ tilting speed Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightAdjusting the White Balance Adjusting the BrightnessTo adjust the white balance automatically To adjust the white balance manuallyStoring Camera Settings To store camera settingsTo select positions 9 to Setting the Speed of the Camera Moving to a Preset Position Installation Installing the CameraTo install the camera on a desk Attaching an Output CardInstalling the Camera in a High Position Before installationTo attach the camera to a tripod Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connecting to an AC Outlet Connecting the RM-BR300 Remote Control UnitConnections Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 Connecting a VTR Equipped with HD-SDI Input Connectors GeneratorTo connect a single camera To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasIndicators on the BRC-Z330 camera List of MessagesMessages for the BRC-Z330 camera Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance Presetting Items General presetting itemsPresetting menu items Setup not available for 1080/50i output signal Specifications Input/output connectorsSupplied accessories SystemAlways verify that the unit is operating properly before use Dimensions BRC-Z330 Video CameraCeiling Bracket B Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-422 connector connector plug 9-pin Visca RS-232C in connector mini-DIN 8-pin, femaleVisca RS-232C OUT connector mini DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleWiring Diagram of Visca RS-422 Connection RM-BR300 Remote Control UnitThird to Seventh BRC-Z330 Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents