Sony BRC-Z330 Owner’s Record, For the customers in the U.S.A, For the customers in Canada

Page 2

Owner’s Record

The model and serial numbers are located on the bottom. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. BRC-Z330

Serial No.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING

Use the Sony MPA-AC1 AC power adapter provided with this equipment as a power supply source. Any other power sources may result in hazards such as a fire. This product has no power switch.

Disconnect device of this equipment is the mains plug of the AC adapter.

The mains plug on this equipment must be used to disconnect mains power.

Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.

In the event of abnormal operations, disconnect the mains plug.

WARNING (For Installers only)

Instruction for installing the equipment on the ceiling: After the installation, ensure the connection is capable of supporting four times the weight of the equipment downwards.

WARNING

This unit has no power switch.

When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket- outlet near the unit.

If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

IMPORTANT

The nameplate is located on the bottom.

For the customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies with Canadian ICES-003.

For the customers in Europe, Australia and New Zealand

WARNING

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

In the case that interference should occur, consult your nearest authorized Sony service facility.

For the customers in Europe

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.

The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.

This apparatus shall not be used in the residential area.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents HD Color Video Camera For the customers in Canada Owner’s RecordFor the customers in the U.S.A For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions Focal plane White flecksAliasing FlickerFeatures Remote commander Supplied Components and AccessoriesCamera MPA-AC1 AC power adaptor Sony AC power cord Ceiling bracket a Ceiling bracket B Wire ropeBRBK-HD2 HD-SDI Output Card BRS-200 Remote Camera Operating SwitcherOptional Products This system allows you System ConfigurationSystem configuration Overview System Configuration BRBK-HD2 Front Location and Function of PartsCamera RearSetting of the Bottom switches BottomRemote Commander supplied Lock button and indicator RM-BR300 Remote Control Unit not suppliedInstalling batteries Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedVisca RS-422 connector Mode selectorVisca RS-232C connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedMain Menu Setting MenusAbout On-Screen Menus To return to the main menu Menu Operation Using the Supplied Remote CommanderOperation Through Menus To return to the normal display4,5 Exposure Menu Mode exposure modeFor the 1080/59.94i or 720/59.94P signal format EX-COMP exposure compensationTo set the Color AE White Balance white balance modeColor Menu Picture Menu To set the Color DetailFocus Menu Black and white modeMode focus mode AF Assist auto focus assistPAN Tilt Zoom Menu Setting range of PAN LEFT/PAN RightSetting range of Tilt DOWN/TILT UP Zoom digital zoomIMG-FLIP image flip IR-RECEIVE infrared signal receptionSystem Menu Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderTo face the camera back to the front Pan/Tilt and Zoom OperationPanning and Tilting If you accidentally move the camera with your handFocusing on a Subject Adjusting the CameraOperating Multiple Cameras with the Remote Commander ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo set a limit on the maximum panning/ tilting speed To assign camera addresses automaticallyTo assign camera addresses manually Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightTo adjust the white balance automatically Adjusting the White BalanceAdjusting the Brightness To adjust the white balance manuallyTo select positions 9 to Storing Camera SettingsTo store camera settings Setting the Speed of the Camera Moving to a Preset Position To install the camera on a desk InstallationInstalling the Camera Attaching an Output CardTo attach the camera to a tripod Installing the Camera in a High PositionBefore installation Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connections Connecting to an AC OutletConnecting the RM-BR300 Remote Control Unit Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 To connect a single camera Connecting a VTR Equipped withHD-SDI Input Connectors Generator To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasMessages for the BRC-Z330 camera Indicators on the BRC-Z330 cameraList of Messages Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance Presetting menu items Presetting ItemsGeneral presetting items Setup not available for 1080/50i output signal Supplied accessories SpecificationsInput/output connectors SystemAlways verify that the unit is operating properly before use Ceiling Bracket B DimensionsBRC-Z330 Video Camera Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-232C OUT connector mini DIN 8-pin, female Visca RS-422 connector connector plug 9-pinVisca RS-232C in connector mini-DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleThird to Seventh BRC-Z330 Wiring Diagram of Visca RS-422 ConnectionRM-BR300 Remote Control Unit Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents