Sony BRC-Z330 Storing Camera Settings, To select positions 9 to, To store camera settings

3 Adjust the brightness with the VALUE or BRIGHT control.

Storing the Camera Settings in Memory

Turn toward – for darkening the picture by changing shutter speed, gain level or F-number.

Turn toward – for darkening the picture by changing exposure compensation level, F-number or gain level.

	VALUE
–	+
	R
	BRIGHT
–	+
	B

Turn toward + for brightening the picture by changing shutter speed, gain level or F- number.

MODE

Turn toward + for brightening the picture by changing exposure compensation level, F- number or gain level.

– Presetting Feature

Up to sixteen combinations of settings (sixteen positions), including camera position, zooming, focusing, and backlighting, can be stored in the memory of the camera using the RM-BR300 Remote Control Unit.

For details of the camera settings to be preset, see “Presetting Items” on page 64.

Functions of the VALUE and BRIGHT controls The functions of the VALUE control and the BRIGHT control change according to the MODE setting in the EXPOSURE menu, as follows:

MODE	Function of	Function of BRIGHT
setting	VALUE control	control
FULL AUTO	Not used	Exposure compensation
		level control*
SHUTTER	Shutter speed	Exposure compensation
Pri	control	level control*
IRIS Pri	F-number control	Exposure compensation
		level control*
GAIN Pri	Gain control	Exposure compensation
		level control*
MANUAL	Shutter speed	•	F-number and gain
	control		controls (when the
			DIP switch 3 at the
			bottom of the Remote
			Control Unit is set to
			ON)
		•	F-number control
			(when the DIP switch
			3 at the bottom of the
			Remote Control Unit
			is set to OFF)

* When EX-COMP is ON in the EXPOSURE menu

Storing Camera Settings

To select positions 9 to 16

While holding down the SHIFT button, press the PRESET button (to store the settings) or the RESET button (to cancel the settings). The lower indicator on the SHIFT button will light and the POSITION 1 to 8 buttons can be used for positions 9 to 16.

When you release the SHIFT button, the upper indicator lights and the POSITION 1 to 8 buttons can be used for positions 1 to 8.

Lights for positions 1 to 8.

SHIFT

Lights for positions 9 to 16.

To store camera settings

RESET 4 1

VALUE		LOCK			PANEL	BLACK	PAN-TILT	ONE PUSH
					LIGHT	LIGHT	RESET		AWB		MENU
			RESET
–	+
	R		PRESET			POSITION
		MODE
BRIGHT
			SHIFT	1	2	3	4	5	6	7	8
				9	10	11	12	13	14	15	16
–	+		L/R	STD	REV
	B		DIRECTION			CAMERA
		AUTO
FOCUS		AUTO	POWER	1	2	3	4	5	6	7
		MANUAL
		ONE PUSH
NEAR	FAR	AF

42

1Press the PAN-TILT RESET button to reset the pan/ tilt position.

2Press the CAMERA button to select the camera whose settings you want to preset.

3Adjust the position, zooming, focusing and backlighting of the camera. (See page 37 to 39.)

Operation Using the RM-BR300 Remote Control Unit

Storing the Camera Settings in Memory – Presetting Feature

41