Sony BRC-Z330 operating instructions About On-Screen Menus, Setting Menus, Main Menu

Page 20

Adjusting and Setting With Menus

Setting Menus

 

The setting menu selected on the main menu is

 

 

displayed.

Adjusting and Setting With Menus

About On-Screen Menus

You can change various settings, such as shooting conditions and system setup of the camera, while observing menus displayed on a connected monitor. This section explains how to read the on-screen menus before starting menu operations.

For the overall menu configurations, see page 60.

Note

You cannot perform pan/tilt and zoom operations while the menu is displayed.

Main Menu

To display the main menu, press the DATA SCREEN button on the supplied Remote Commander or the MENU button on the RM-BR300 Remote Control Unit.

<MENU> HD - SDI >EXPOSURE

COLOR PICTURE FOCUS

PAN TILT ZOOM SYSTEM VIDEO OUT STATUS

1Cursor

Selects a setting menu.

Move the cursor up or down by pressing the V or v button on the Remote Commander or by inclining the joystick of the RM-BR300 Remote Control Unit forward or backward.

2Menu items

To display a setting menu, select one using the V or v button on the Remote Commander or the joystick of the RM-BR300 Remote Control Unit, and press the HOME button on the Remote Commander or the top button of the joystick on the RM-BR300.

3Option Card indicator

Displays the name of the output card inserted into the card slot of the camera.

(The illustration above shows an example when the BRBK-HD2 HD-SDI Output Card is inserted.)

 

 

 

 

 

 

 

 

 

 

<SYSTEM>

 

 

 

 

 

>IR - RECEIVE

ON

 

 

 

 

IMG - FLIP

OFF

 

 

 

 

PAN

 

REVERSE

OFF

 

 

 

 

TILT

 

REVERSE

OFF

 

 

 

 

DISPLAY INFO

ON

 

 

 

 

SYNC

MASTER

HD

 

 

 

 

H PHASE

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Setting menu

The name of the setting menu currently selected is displayed here.

2Cursor

Selects a setting item.

Move the cursor up or down by pressing the V or v button on the Remote Commander or inclining the joystick of the RM-BR300 Remote Control Unit forward or backward.

3Setting items

The setting items for this setting menu are displayed.

To change a set value, select the setting item using the V or v button on the Remote Commander or the joystick of the RM-BR300 Remote Control Unit, and press the B or b button on the Remote Commander or incline the joystick on the RM- BR300 right or left.

4Set value

The currently set values are displayed.

To change a set value, use the B or b button on the Remote Commander or the joystick of the RM- BR300 Remote Control Unit.

For the default value of each setting item, see “Menu Configuration” on page 60.

20

About On-Screen Menus

Page 19 Page 21
Image 20
Page 19 Page 21
Contents HD Color Video Camera Owner’s Record For the customers in the U.S.AFor the customers in Canada For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions White flecks AliasingFocal plane FlickerFeatures Supplied Components and Accessories Camera MPA-AC1 AC power adaptor Sony AC power cordRemote commander Ceiling bracket a Ceiling bracket B Wire ropeBRBK-HD2 HD-SDI Output Card BRS-200 Remote Camera Operating SwitcherOptional Products This system allows you System ConfigurationSystem configuration Overview System Configuration BRBK-HD2 Location and Function of Parts CameraFront RearSetting of the Bottom switches BottomRemote Commander supplied RM-BR300 Remote Control Unit not supplied Installing batteriesLock button and indicator Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedMode selector Visca RS-232C connectorVisca RS-422 connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedMain Menu Setting MenusAbout On-Screen Menus Menu Operation Using the Supplied Remote Commander Operation Through MenusTo return to the main menu To return to the normal display4,5 Mode exposure mode For the 1080/59.94i or 720/59.94P signal formatExposure Menu EX-COMP exposure compensationTo set the Color AE White Balance white balance modeColor Menu Picture Menu To set the Color DetailBlack and white mode Mode focus modeFocus Menu AF Assist auto focus assistSetting range of PAN LEFT/PAN Right Setting range of Tilt DOWN/TILT UPPAN Tilt Zoom Menu Zoom digital zoomIMG-FLIP image flip IR-RECEIVE infrared signal receptionSystem Menu Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderPan/Tilt and Zoom Operation Panning and TiltingTo face the camera back to the front If you accidentally move the camera with your handAdjusting the Camera Operating Multiple Cameras with the Remote CommanderFocusing on a Subject ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo set a limit on the maximum panning/ tilting speed To assign camera addresses automaticallyTo assign camera addresses manually Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightAdjusting the White Balance Adjusting the BrightnessTo adjust the white balance automatically To adjust the white balance manuallyTo select positions 9 to Storing Camera SettingsTo store camera settings Setting the Speed of the Camera Moving to a Preset Position Installation Installing the CameraTo install the camera on a desk Attaching an Output CardTo attach the camera to a tripod Installing the Camera in a High PositionBefore installation Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connections Connecting to an AC OutletConnecting the RM-BR300 Remote Control Unit Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 To connect a single camera Connecting a VTR Equipped withHD-SDI Input Connectors Generator To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasMessages for the BRC-Z330 camera Indicators on the BRC-Z330 cameraList of Messages Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance Presetting menu items Presetting ItemsGeneral presetting items Setup not available for 1080/50i output signal Specifications Input/output connectorsSupplied accessories SystemAlways verify that the unit is operating properly before use Dimensions BRC-Z330 Video CameraCeiling Bracket B Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-422 connector connector plug 9-pin Visca RS-232C in connector mini-DIN 8-pin, femaleVisca RS-232C OUT connector mini DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleWiring Diagram of Visca RS-422 Connection RM-BR300 Remote Control UnitThird to Seventh BRC-Z330 Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents