Sony BRC-Z330 Focus Menu, Black and white mode, Mode focus mode, AF Assist auto focus assist

Page 26

Adjusting and Setting With Menus

GAMMA

Select the gamma curve of the camera.

NORMAL: The object is shot using normal gamma curve.

CINEMA: The object is shot using a gamma curve to reproduce a film-like picture with a natural tone.

KNEE POINT

The KNEE function minimizes washout of picture that may occur with a bright portion of a picture or when shooting a white object.

AUTO: The KNEE POINT is adjusted automatically.

LOW: Set the KNEE POINT to lower level than MID.

MID: Set the KNEE POINT midway between LOW and HIGH.

HIGH: Set the KNEE POINT to higher level than MID.

OFF: KNEE does not function.

Note

When GAMMA is set to CINEMA, KNEE POINT cannot be set.

FLICKER CANCEL

When this item is set to ON, picture blurs (flicker) can be reduced even when shooting under a 50Hz fluorescent light. Set it to OFF to disable this feature.

Note

The FLICKER CANCEL feature may have no effect depending on the type of light source.

B&W (black and white mode)

When this item is set to ON, an image is shot in black and white.

COLOR BAR

When this item is set to ON, the built-in color bar of the camera is displayed on the monitor screen.

FOCUS Menu

The FOCUS menu is used to select the focus mode.

<FOCUS>

 

>MODE

AUTO

NEAR LIMIT

ON

AF ASSIST

ON

MODE (focus mode)

Select the focus adjustment mode.

AUTO: The focus is adjusted automatically.

MANUAL: Adjust the focus manually. Use the FAR/ NEAR buttons on the supplied Remote Commander to adjust the focus.

Note

Set MODE to MANUAL when you shoot

•a flat subject with low contrast such as a white wall.

•a subject through glass.

•a lateral-striped subject.

•a subject exposed to strong light with an illumination, reflecting light, etc.

•a subject in a dark background with flashing lights such as a night view.

NEAR LIMIT

Focusing on a subject located near the camera is limited.

ON: A subject closer to the camera than about 50 cm (19 3/4 inches) is not focused.

OFF: The camera-subject distance is focused for about 10 cm (4 inches) to infinity.

AF ASSIST (auto focus assist)

You can temporarily adjust the focus manually even when MODE is set to AUTO.

The AF ASSIST feature is available only when MODE is set to AUTO.

ON: You can adjust to focus another subject in a forward or backward location with the NEAR/FAR buttons on the supplied Remote Commander or the FOCUS control on the optional RM-BR300 Remote Control Unit.

OFF: The focus of the subject is adjusted automatically. Manual focus adjustment is deactivated.

26

FOCUS Menu

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HD Color Video Camera For the customers in Canada Owner’s RecordFor the customers in the U.S.A For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions Focal plane White flecksAliasing FlickerFeatures Remote commander Supplied Components and AccessoriesCamera MPA-AC1 AC power adaptor Sony AC power cord Ceiling bracket a Ceiling bracket B Wire ropeBRBK-HD2 HD-SDI Output Card BRS-200 Remote Camera Operating SwitcherOptional Products This system allows you System ConfigurationSystem configuration Overview System Configuration BRBK-HD2 Front Location and Function of PartsCamera RearSetting of the Bottom switches BottomRemote Commander supplied Lock button and indicator RM-BR300 Remote Control Unit not suppliedInstalling batteries Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedVisca RS-422 connector Mode selectorVisca RS-232C connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedMain Menu Setting MenusAbout On-Screen Menus To return to the main menu Menu Operation Using the Supplied Remote CommanderOperation Through Menus To return to the normal display4,5 Exposure Menu Mode exposure modeFor the 1080/59.94i or 720/59.94P signal format EX-COMP exposure compensationTo set the Color AE White Balance white balance modeColor Menu Picture Menu To set the Color DetailFocus Menu Black and white modeMode focus mode AF Assist auto focus assistPAN Tilt Zoom Menu Setting range of PAN LEFT/PAN RightSetting range of Tilt DOWN/TILT UP Zoom digital zoomIMG-FLIP image flip IR-RECEIVE infrared signal receptionSystem Menu Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderTo face the camera back to the front Pan/Tilt and Zoom OperationPanning and Tilting If you accidentally move the camera with your handFocusing on a Subject Adjusting the CameraOperating Multiple Cameras with the Remote Commander ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo set a limit on the maximum panning/ tilting speed To assign camera addresses automaticallyTo assign camera addresses manually Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightTo adjust the white balance automatically Adjusting the White BalanceAdjusting the Brightness To adjust the white balance manuallyTo select positions 9 to Storing Camera SettingsTo store camera settings Setting the Speed of the Camera Moving to a Preset Position To install the camera on a desk InstallationInstalling the Camera Attaching an Output CardTo attach the camera to a tripod Installing the Camera in a High PositionBefore installation Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connections Connecting to an AC OutletConnecting the RM-BR300 Remote Control Unit Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 To connect a single camera Connecting a VTR Equipped withHD-SDI Input Connectors Generator To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasMessages for the BRC-Z330 camera Indicators on the BRC-Z330 cameraList of Messages Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance Presetting menu items Presetting ItemsGeneral presetting items Setup not available for 1080/50i output signal Supplied accessories SpecificationsInput/output connectors SystemAlways verify that the unit is operating properly before use Ceiling Bracket B DimensionsBRC-Z330 Video Camera Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-232C OUT connector mini DIN 8-pin, female Visca RS-422 connector connector plug 9-pinVisca RS-232C in connector mini-DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleThird to Seventh BRC-Z330 Wiring Diagram of Visca RS-422 ConnectionRM-BR300 Remote Control Unit Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents