Sony BRC-Z330 operating instructions Video OUT Menu, Display Info information display

Page 29

IMG-FLIP to OFF, then turn the power off and on again, PAN REVERSE and TILT REVERSE will be set to OFF.

•If you set IMG-FLIP to ON, the remote sensor at the rear of the camera does not function.

DISPLAY INFO (information display)

When the camera settings are stored in POSITION 1 to 16 using the supplied Remote Commander or the RM- BR300 Remote Control Unit, the message “PRESET No. xx” automatically appears for 2 seconds on the monitor screen. If you want to display the message each time the camera is operated, set DISPLAY INFO to ON. Set it to OFF to cancel the display.

Note

The message will appear if the built-in cooling fan of the camera has accidentally stopped. When DISPLAY INFO is set to OFF, the display of this message is also canceled.

SYNC MASTER

When you connect a sync signal generator, you can select an output video signal that is synchronized with the external video sync signal input to the EXT SYNC IN connector on the camera from among the following output signals:

HD: Selects the output signal from the RGB/ COMPONENT connector on the camera.

SD: Selects the output signal from the VIDEO or S VIDEO connector on the camera.

H PHASE

When you connect a sync signal generator, adjust the horizontal phase so that the output signal is synchronized with the external sync signal input to the camera. The adjustable range is from 0 to 140.

When you select H PHASE on the menu, the message “PUSH ENTER BUTTON” appears on the screen. Press the HOME button on the Remote Commander or the button on the top of the joystick on the Remote Control Unit to make the color bars appear.

After completing the adjustment, press the HOME button on the Remote Commander or the button on the top of the joystick on the Remote Control Unit to make the color bar disappear.

VIDEO OUT Menu

<VIDEO OUT>

HD-RGB/COMPONENT

>FORMAT

 

 

 

YPBPR

SYNC TYPE

 

 

 

 

SYNC

SD-VIDEO/S

VIDEO

IMG SIZE

16:9[LETTER]

SETUP

 

 

 

 

OFF

HD-RGB/COMPONENT

FORMAT

Select the signal output from the RGB/ COMPONENT connector on the camera.

YPBPR: Outputs analog component signals.

RGB: Outputs RGB signals.

When you select a mode for FORMAT, some of the following setting items that are required for selected mode appear.

ADD SYNC: Specifies whether to add a sync signal. Setting the item to RGB specifies output of each R, G, and B signal with a sync signal added. Setting the item to OFF specifies output of each R, G, and B signal with no sync signal added.

SYNC TYPE: Specifies the type of sync signal. Setting

the item to SYNC specifies output of tri-level sync. Setting the item to VD specifies output of bi- level sync.

SD-VIDEO/S VIDEO

IMG SIZE

Select the aspect ratio of the signal output from the

VIDEO or S VIDEO connector on the camera.

16:9[LETTER]: The image is displayed in 16:9 letterbox.

4:3[CROP]: The image is displayed in 4:3 edge crop.

4:3[SQUEEZE]: The image is displayed in 4:3 squeeze.

SETUP

Select whether 7.5IRE setup is added to output signals.

ON: Outputs signals with 7.5IRE setup added.

OFF: Outputs signals with no 7.5IRE setup added.

Adjusting and Setting With Menus

VIDEO OUT Menu

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HD Color Video Camera For the customers in the U.S.A Owner’s RecordFor the customers in Canada For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions Aliasing White flecksFocal plane FlickerFeatures Camera MPA-AC1 AC power adaptor Sony AC power cord Supplied Components and AccessoriesRemote commander Ceiling bracket a Ceiling bracket B Wire ropeBRBK-HD2 HD-SDI Output Card BRS-200 Remote Camera Operating SwitcherOptional Products This system allows you System ConfigurationSystem configuration Overview System Configuration BRBK-HD2 Camera Location and Function of PartsFront RearBottom Setting of the Bottom switchesRemote Commander supplied Installing batteries RM-BR300 Remote Control Unit not suppliedLock button and indicator Mode buttonWhen the menu of the camera is displayed When the menu of the camera is not displayedVisca RS-232C connector Mode selectorVisca RS-422 connector TALLY/CONTACT connectorBRBK-HD2 HD-SDI Output Card not supplied Wk ON/OFF switchMain Menu Setting MenusAbout On-Screen Menus Operation Through Menus Menu Operation Using the Supplied Remote CommanderTo return to the main menu To return to the normal display4,5 For the 1080/59.94i or 720/59.94P signal format Mode exposure modeExposure Menu EX-COMP exposure compensationTo set the Color AE White Balance white balance modeColor Menu To set the Color Detail Picture MenuMode focus mode Black and white modeFocus Menu AF Assist auto focus assistSetting range of Tilt DOWN/TILT UP Setting range of PAN LEFT/PAN RightPAN Tilt Zoom Menu Zoom digital zoomIMG-FLIP image flip IR-RECEIVE infrared signal receptionSystem Menu Display Info information display Video OUT MenuStatus Menu To turn on/off the camera using the Remote Commander Turning on the PowerPanning and Tilting Pan/Tilt and Zoom OperationTo face the camera back to the front If you accidentally move the camera with your handOperating Multiple Cameras with the Remote Commander Adjusting the CameraFocusing on a Subject ZoomingShooting with Back Lighting Storing the Camera Settings in MemoryTo cancel the preset memory To recall the stored settingsOperating Multiple Cameras Operation Using the RM-BR300 Remote Control UnitTo set a limit on the maximum panning/ tilting speed To assign camera addresses automaticallyTo assign camera addresses manually Joystick Movement Setting Camera Mode ONE Push AWB Shift VALUE/R Back Light One-push auto focusing during manual focus adjustmentAdjusting the Brightness Adjusting the White BalanceTo adjust the white balance automatically To adjust the white balance manuallyTo select positions 9 to Storing Camera SettingsTo store camera settings Setting the Speed of the Camera Moving to a Preset Position Installing the Camera InstallationTo install the camera on a desk Attaching an Output CardTo attach the camera to a tripod Installing the Camera in a High PositionBefore installation Installation on a ceiling example Wire rope supplied 3M4 To remove the camera Installation on a shelf, etc. in a high position exampleWire rope supplied Installation and Connections To remove the camera Connections Connecting to an AC OutletConnecting the RM-BR300 Remote Control Unit Visca RS-422 Connecting a Device Equipped with Visca RS-422 Connector Connecting a Device Equipped with Visca RS-232C ConnectorVisca RS-422 To connect a single camera Connecting a VTR Equipped withHD-SDI Input Connectors Generator You can connect up to seven cameras To connect multiple cameras to the HD sync signal generatorMessages for the BRC-Z330 camera Indicators on the BRC-Z330 cameraList of Messages Symptom Cause Remedy TroubleshootingAppendix Troubleshooting Full Auto Menu ConfigurationNormal YP BP R Color Gain Color HUE Color Matrix Enhance Presetting menu items Presetting ItemsGeneral presetting items Setup not available for 1080/50i output signal Input/output connectors SpecificationsSupplied accessories SystemAlways verify that the unit is operating properly before use BRC-Z330 Video Camera DimensionsCeiling Bracket B Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-232C in connector mini-DIN 8-pin, female Visca RS-422 connector connector plug 9-pinVisca RS-232C OUT connector mini DIN 8-pin, female Pin AssignmentsVisca RS-232C output connector mini DIN 8- pin, female RM-BR300 Remote Control Unit optionalRM-BR300 Remote Control Unit Wiring Diagram of Visca RS-422 ConnectionThird to Seventh BRC-Z330 Second BRC-Z330To remove the connector plug Using the Visca RS-422 Connector Plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents