Sony BRC-Z330 Storing the Camera Settings in Memory, Shooting with Back Lighting

Shooting with Back Lighting

When you shoot a subject with a light source behind it, the subject becomes dark. In such a case, press the BACK LIGHT button.

To cancel the function, press the BACK LIGHT button again.

FOCUS
AUTO		MANUAL
FAR	NEAR
DATA SCREEN		BACK LIGHT	Subject appears brighter.
STD	REV
1	2	3

Note

The BACK LIGHT function is not effective if MODE is set to MANUAL in the EXPOSURE menu of the camera.

Operation

Storing the Camera Settings in Memory

– Presetting Feature

Up to six combinations of settings (six positions) including camera position, zooming, focusing, and backlighting, can be preset.

Note

The camera can store up to sixteen combinations of settings (sixteen positions) in the memory, but the supplied Remote Commander supports preset of six positions only (POSITION 1 to 6). Use the RM-BR300 Remote Control Unit (not supplied) to store the settings in POSITION 7 to 16.

For details of the camera settings to be preset, see “Presetting Items” on page 64.

POWER

Using the Supplied Remote Commander

CAMERA	SELECT		3	MANUAL
	2
1	FOCUS NEAR					BACK		LIGHT
AUTO	FAR
		SCREEN								3
							REV
	DATA								2
				STD
					1					5
								4
3 PRESET									PRESET

2

2

3 POSITION 1-6

6
RESET						RESET
POSITION
	-TILT		-TILT			1
PAN			PAN ET
	HOME		RES
			FAST
	SLOW	ZOOM		T
						W
		T				-EV100
			W			RM
			L/R	ON	SET
			DIRECTI

1 Press the PAN-TILT RESET button to reset the pan/ tilt position.

2 Adjust the position, zooming, focusing and backlighting of the camera (pages 32 to 33).

3 While holding down the PRESET button, press any of the POSITION buttons, 1 to 6, in which you want to store the settings.

DATA SCREEN		BACK LIGHT
STD	REV
1	2	3	Press a POSITION
4	5	6
			button.

PRESET RESET

While holding down POSITION

The message “PRESET No.xx” (selected POSITION number) is displayed for about 2 seconds.

34

Storing the Camera Settings in Memory – Presetting Feature