Sony BRC-Z330 System Menu, IR-RECEIVE infrared signal reception, IMG-FLIP image flip

Page 28

VIDEO connector of the camera, and the SDI OUTPUT connector of an optional BRBK-HD2 Output Card, if one is installed in a card slot.

Adjusting and Setting With Menus

SYSTEM Menu

<SYSTEM>

 

>IR-RECEIVE

ON

IMG-FLIP

OFF

PAN

REVERSE

OFF

TILT

REVERSE

OFF

DISPLAY INFO

ON

SYNC

MASTER

HD

H PHASE

10

IR-RECEIVE (infrared signal reception)

When it is set to OFF, the camera does not receive the signal from the supplied Remote Commander.

Be sure to keep it ON when you use the supplied Remote Commander.

Note

You cannot set IR-RECEIVE to OFF when you operate the menu using the supplied Remote Commander. To set it to OFF, use the RM-BR300 Remote Control Unit (not supplied) or the VISCA command.

IMG-FLIP (image flip)

Set IMG-FLIP to ON to rotate the camera image

supplied from the RGB/COMPONENT connector,

S VIDEO connector, VIDEO connector, and the SDI OUTPUT connector on an optional BRBK-HD2 Output Card if one is installed in a card slot, upside/ down and to reverse the direction of the camera movement with pan/tilt operations.

PAN REVERSE: Set to ON to reverse the horizontal movement of the camera image.

TILT REVERSE: Set to ON to reverse the vertical movement of the camera image.

When you set IMG-FLIP to ON, “Please restart system!” appears. Turn off the power of the camera and turn it on again.

Notes

•Regardless of the IMG-FLIP to ON/OFF setting, images shot with the camera are accumulated for the vertical synchronization period and output from the RGB/COMPONENT connector, S VIDEO

connector, VIDEO connector of the camera, and the SDI OUTPUT connector on an optional BRBK- HD2 Output Card, if one is installed in a card slot.

•When you set IMG-FLIP to ON, then turn off the camera and turn it on again, PAN REVERSE and TILT REVERSE will be set to ON. When you set

28

SYSTEM Menu

Page 27 Page 29
Image 28
Page 27 Page 29
Contents HD Color Video Camera Owner’s Record For the customers in the U.S.AFor the customers in Canada For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions White flecks AliasingFocal plane FlickerFeatures Supplied Components and Accessories Camera MPA-AC1 AC power adaptor Sony AC power cordRemote commander Ceiling bracket a Ceiling bracket B Wire ropeOptional Products BRS-200 Remote Camera Operating SwitcherBRBK-HD2 HD-SDI Output Card System configuration System ConfigurationThis system allows you Overview System Configuration BRBK-HD2 Location and Function of Parts CameraFront RearSetting of the Bottom switches BottomRemote Commander supplied RM-BR300 Remote Control Unit not supplied Installing batteriesLock button and indicator Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedMode selector Visca RS-232C connectorVisca RS-422 connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedAbout On-Screen Menus Setting MenusMain Menu Menu Operation Using the Supplied Remote Commander Operation Through MenusTo return to the main menu To return to the normal display4,5 Mode exposure mode For the 1080/59.94i or 720/59.94P signal formatExposure Menu EX-COMP exposure compensationColor Menu White Balance white balance modeTo set the Color AE Picture Menu To set the Color DetailBlack and white mode Mode focus modeFocus Menu AF Assist auto focus assistSetting range of PAN LEFT/PAN Right Setting range of Tilt DOWN/TILT UPPAN Tilt Zoom Menu Zoom digital zoomSystem Menu IR-RECEIVE infrared signal receptionIMG-FLIP image flip Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderPan/Tilt and Zoom Operation Panning and TiltingTo face the camera back to the front If you accidentally move the camera with your handAdjusting the Camera Operating Multiple Cameras with the Remote CommanderFocusing on a Subject ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo assign camera addresses manually To assign camera addresses automaticallyTo set a limit on the maximum panning/ tilting speed Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightAdjusting the White Balance Adjusting the BrightnessTo adjust the white balance automatically To adjust the white balance manuallyTo store camera settings Storing Camera SettingsTo select positions 9 to Setting the Speed of the Camera Moving to a Preset Position Installation Installing the CameraTo install the camera on a desk Attaching an Output CardBefore installation Installing the Camera in a High PositionTo attach the camera to a tripod Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connecting the RM-BR300 Remote Control Unit Connecting to an AC OutletConnections Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 HD-SDI Input Connectors Generator Connecting a VTR Equipped withTo connect a single camera To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasList of Messages Indicators on the BRC-Z330 cameraMessages for the BRC-Z330 camera Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance General presetting items Presetting ItemsPresetting menu items Setup not available for 1080/50i output signal Specifications Input/output connectorsSupplied accessories SystemAlways verify that the unit is operating properly before use Dimensions BRC-Z330 Video CameraCeiling Bracket B Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-422 connector connector plug 9-pin Visca RS-232C in connector mini-DIN 8-pin, femaleVisca RS-232C OUT connector mini DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleWiring Diagram of Visca RS-422 Connection RM-BR300 Remote Control UnitThird to Seventh BRC-Z330 Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents