Sony BRC-Z330 operating instructions Features

Page 7

Overview

Features

Compact, HD video camera with built-in pan/tilt/zoom functions

•This HD video camera is equipped with an HD camera block, pan/tilt mechanism, and 18-magnification optical/4-magnification digital zoom lens in a compact body. The compactness and integration allow the camera versatile usage.

•The camera is provided with a wide-angle pan/tilt mechanism of ±175º horizontally, 90º upward and 30º downward, which enables wide-range remote shooting.

•The pan/tilt mechanism is designed to be quiet so as to minimize troublesome noise.

•The supplied ceiling brackets allow installation of the camera on a ceiling or a shelf, etc. in a high position.

HD CMOS camera with high image quality and high-resolution remote shooting

•The newly developed camera system that incorporates 1/3-type CMOS image sensors with a total of 2,250,000 picture elements allows shooting of high- definition images, providing superior picture quality with high sensitivity and lower smear level.

•Shooting an image using the 1080i (effective interlaced scanning: 1080 lines) high-definition format, which is equivalent to the HDTV broadcast, is enabled. The HD format can be switched (1080/59.94i or 1080/50i) with the switch at the bottom of the camera.

•A volume of information of four times the capacity of a normal TV broadcast and camera image shot in 16:9 aspect ratio provides a theater-like wide screen picture.

Multi-format HD outputs

The camera supports output in 720P format (progressive scanning format with 720 effective scan lines) as well as in 1080i format. These formats can be selected with a switch at the bottom of the camera, which also allows switching between the 720/59.94P and 720/50P formats.

Built-in down-converted output

The camera is equipped with video output connectors, allowing HD1) or SD2) output without inserting an Interface Board. You can use the connectors for SD output at the moment and use them for HD output in the future.

An analog component signal output connector for HD output, a composite signal output connector, and an S video signal output connector for SD output standard equipment.

1)“HD” indicates high-definition broadcast with 1,080 effective scanning lines.

2)“SD” indicates standard-definition broadcast (conventional television).

Built-in interface card slot

The camera is equipped with an interface card slot for the optional BRBK-HD2 HD-SDI Output Card. Use of the BRBK-HD2 HD-SDI Output Card provides support for additional image output formats.

VISCA camera protocol supported

•The camera is equipped with both RS-232C and RS- 422 communication interfaces. As the camera supports the industry-standard VISCA camera protocol, up to 7 cameras can be connected and remotely controlled at a high communication speed of 38,400 bps.

•The optional RM-BR300 Remote Control Unit allows easy camera operations.

External video sync function

The camera is equipped with an external video sync function to synchronize the camera images on multiple cameras.

Tally lamp

The tally lamp of the camera allows you to make sure it is selected at a glance.

COLOR AE function

The COLOR AE function enables automatic exposure adjustment for a specific color.

Built-in ND filter

The ND (Neutral Density) filter allows control of amount of light. The ND filter can be set to 1/4 or 1/16, using the menu or Remote Commander.

Overview

Features

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HD Color Video Camera For the customers in Europe, Australia and New Zealand Owner’s RecordFor the customers in the U.S.A For the customers in CanadaTable of Contents Appendix Precautions Flicker White flecksAliasing Focal planeFeatures Ceiling bracket a Ceiling bracket B Wire rope Supplied Components and AccessoriesCamera MPA-AC1 AC power adaptor Sony AC power cord Remote commanderOptional Products BRS-200 Remote Camera Operating SwitcherBRBK-HD2 HD-SDI Output Card System configuration System ConfigurationThis system allows you Overview System Configuration BRBK-HD2 Rear Location and Function of PartsCamera FrontBottom Setting of the Bottom switchesRemote Commander supplied Mode button RM-BR300 Remote Control Unit not suppliedInstalling batteries Lock button and indicatorWhen the menu of the camera is displayed When the menu of the camera is not displayedTALLY/CONTACT connector Mode selectorVisca RS-232C connector Visca RS-422 connectorBRBK-HD2 HD-SDI Output Card not supplied Wk ON/OFF switchAbout On-Screen Menus Setting MenusMain Menu To return to the normal display Menu Operation Using the Supplied Remote CommanderOperation Through Menus To return to the main menu4,5 EX-COMP exposure compensation Mode exposure modeFor the 1080/59.94i or 720/59.94P signal format Exposure MenuColor Menu White Balance white balance modeTo set the Color AE To set the Color Detail Picture MenuAF Assist auto focus assist Black and white modeMode focus mode Focus MenuZoom digital zoom Setting range of PAN LEFT/PAN RightSetting range of Tilt DOWN/TILT UP PAN Tilt Zoom MenuSystem Menu IR-RECEIVE infrared signal receptionIMG-FLIP image flip Display Info information display Video OUT MenuStatus Menu To turn on/off the camera using the Remote Commander Turning on the PowerIf you accidentally move the camera with your hand Pan/Tilt and Zoom OperationPanning and Tilting To face the camera back to the frontZooming Adjusting the CameraOperating Multiple Cameras with the Remote Commander Focusing on a SubjectShooting with Back Lighting Storing the Camera Settings in MemoryTo cancel the preset memory To recall the stored settingsOperating Multiple Cameras Operation Using the RM-BR300 Remote Control UnitTo assign camera addresses manually To assign camera addresses automaticallyTo set a limit on the maximum panning/ tilting speed Joystick Movement Setting Camera Mode ONE Push AWB Shift VALUE/R Back Light One-push auto focusing during manual focus adjustmentTo adjust the white balance manually Adjusting the White BalanceAdjusting the Brightness To adjust the white balance automaticallyTo store camera settings Storing Camera SettingsTo select positions 9 to Setting the Speed of the Camera Moving to a Preset Position Attaching an Output Card InstallationInstalling the Camera To install the camera on a deskBefore installation Installing the Camera in a High PositionTo attach the camera to a tripod Installation on a ceiling example Wire rope supplied 3M4 To remove the camera Installation on a shelf, etc. in a high position exampleWire rope supplied Installation and Connections To remove the camera Connecting the RM-BR300 Remote Control Unit Connecting to an AC OutletConnections Visca RS-422 Connecting a Device Equipped with Visca RS-422 Connector Connecting a Device Equipped with Visca RS-232C ConnectorVisca RS-422 HD-SDI Input Connectors Generator Connecting a VTR Equipped withTo connect a single camera You can connect up to seven cameras To connect multiple cameras to the HD sync signal generatorList of Messages Indicators on the BRC-Z330 cameraMessages for the BRC-Z330 camera Symptom Cause Remedy TroubleshootingAppendix Troubleshooting Full Auto Menu ConfigurationNormal YP BP R Color Gain Color HUE Color Matrix Enhance General presetting items Presetting ItemsPresetting menu items Setup not available for 1080/50i output signal System SpecificationsInput/output connectors Supplied accessoriesAlways verify that the unit is operating properly before use Top Side Front DimensionsBRC-Z330 Video Camera Ceiling Bracket BRM-BR300 Remote Control Unit Top Pin Assignments Visca RS-422 connector connector plug 9-pinVisca RS-232C in connector mini-DIN 8-pin, female Visca RS-232C OUT connector mini DIN 8-pin, femaleVisca RS-232C output connector mini DIN 8- pin, female RM-BR300 Remote Control Unit optionalSecond BRC-Z330 Wiring Diagram of Visca RS-422 ConnectionRM-BR300 Remote Control Unit Third to Seventh BRC-Z330To remove the connector plug Using the Visca RS-422 Connector Plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents