Sony BRC-Z330 operating instructions Visca RS-422

To connect the Remote Control Unit using the VISCA RS-422 connectors

You can use the VISCA RS-422 connectors to connect the RM-BR300 Remote Control Unit to the camera instead of the VISCA RS-232C connectors. Use of the VISCA RS-422 connectors allows the connection up to 1,200 m (3,937 feet) away.

Prepare the connecting cable using the RS-422 connector plugs that come with the camera and the Remote Control Unit.

For making the cable, refer to the pin assignments of the VISCA RS-422 connector (pages 70 and 71) and the wiring diagram of VISCA RS-422 connection

(page 72).

For the use of the RS-422 connector plugs, see page 73.

1 2 3 4 5 6 7 8 9		IR SELECT	R
		1	OFF	ON
		2	DATA MIX
	-422	3	OFF	ON EXT SYNC IN
!			75
DC IN 12V IN VISCA	RS-232C OUT	S VIDEO	VIDEO	RGB/COMPONENT

DC IN 12V

Installation		VISCA RS-422
and Connections		VISCA RS-422 cable
		VISCA RS-422
	RM-BR300 Remote	DC IN 12V
	Control Unit

Notes

•When using the VISCA RS-422 connectors, check that the BOTTOM switch on the bottom of the camera (page 14) and the DIP switch on the bottom of the Remote Control Unit (page 18) are set to RS-422.

•When the connections using the VISCA RS-422 connectors are made, the VISCA RS-232C connection is not available.

Connecting a Monitor, etc. Equipped with the Analog Component (YPbPr) Input Connector

1 2 3 4 5 6 7 8 9 IR SELECT R

1OFF ON

2DATA MIX

VISCA RS-422	OFF	ON	EXT SYNC IN
!		75

DC IN 12V	IN VISCA	RS-232C OUT	S VIDEO	VIDEO
DC IN 12V

RGB/COMPONENT

Connecting cable with D-sub 15-pin connectors (commercially available)

to component video input

HD video monitor, etc.

52

Connections