Sony BRC-Z330 operating instructions Wire rope supplied 3M4

Page 46

6 Attach the wire rope to the ceiling bracket (A). Pass the wire rope through the fixing hole and attach its end to the attachment hole on the bracket using the supplied one screw (3M4 × 8).

Wire rope (supplied)

3M4

× 8 (supplied)

Fixing hole for wire

rope

 

7 Insert the protrusions on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B) with the a hole in the front of the ceiling bracket (A) aligned with the f hole on the ceiling bracket (B), and temporarily attach them by turning the ceiling bracket (A) with the camera clockwise.

Ceiling

Ceiling bracket (B)

Ceiling bracket (A)

Ceiling bracket (A)

Installation and Connections

Caution

For attaching the wire rope to the bracket, use only the supplied screw. Using another screw may disable the function of the wire rope.

8 Secure the ceiling brackets (A) and (B) using the supplied three screws (3M3 × 8).

Ceiling

3M3 × 8 (supplied)

46

Installation

Page 45 Page 47
Image 46
Page 45 Page 47
Contents HD Color Video Camera For the customers in Canada Owner’s RecordFor the customers in the U.S.A For the customers in Europe, Australia and New ZealandTable of Contents Appendix Precautions Focal plane White flecksAliasing FlickerFeatures Remote commander Supplied Components and AccessoriesCamera MPA-AC1 AC power adaptor Sony AC power cord Ceiling bracket a Ceiling bracket B Wire ropeOptional Products BRS-200 Remote Camera Operating SwitcherBRBK-HD2 HD-SDI Output Card System configuration System ConfigurationThis system allows you Overview System Configuration BRBK-HD2 Front Location and Function of PartsCamera RearSetting of the Bottom switches BottomRemote Commander supplied Lock button and indicator RM-BR300 Remote Control Unit not suppliedInstalling batteries Mode buttonWhen the menu of the camera is not displayed When the menu of the camera is displayedVisca RS-422 connector Mode selectorVisca RS-232C connector TALLY/CONTACT connectorWk ON/OFF switch BRBK-HD2 HD-SDI Output Card not suppliedAbout On-Screen Menus Setting MenusMain Menu To return to the main menu Menu Operation Using the Supplied Remote CommanderOperation Through Menus To return to the normal display4,5 Exposure Menu Mode exposure modeFor the 1080/59.94i or 720/59.94P signal format EX-COMP exposure compensationColor Menu White Balance white balance modeTo set the Color AE Picture Menu To set the Color DetailFocus Menu Black and white modeMode focus mode AF Assist auto focus assistPAN Tilt Zoom Menu Setting range of PAN LEFT/PAN RightSetting range of Tilt DOWN/TILT UP Zoom digital zoomSystem Menu IR-RECEIVE infrared signal receptionIMG-FLIP image flip Video OUT Menu Display Info information displayStatus Menu Turning on the Power To turn on/off the camera using the Remote CommanderTo face the camera back to the front Pan/Tilt and Zoom OperationPanning and Tilting If you accidentally move the camera with your handFocusing on a Subject Adjusting the CameraOperating Multiple Cameras with the Remote Commander ZoomingStoring the Camera Settings in Memory Shooting with Back LightingTo recall the stored settings To cancel the preset memoryOperation Using the RM-BR300 Remote Control Unit Operating Multiple CamerasTo assign camera addresses manually To assign camera addresses automaticallyTo set a limit on the maximum panning/ tilting speed Joystick Movement Setting Camera One-push auto focusing during manual focus adjustment Mode ONE Push AWB Shift VALUE/R Back LightTo adjust the white balance automatically Adjusting the White BalanceAdjusting the Brightness To adjust the white balance manuallyTo store camera settings Storing Camera SettingsTo select positions 9 to Setting the Speed of the Camera Moving to a Preset Position To install the camera on a desk InstallationInstalling the Camera Attaching an Output CardBefore installation Installing the Camera in a High PositionTo attach the camera to a tripod Installation on a ceiling example Wire rope supplied 3M4 Installation on a shelf, etc. in a high position example To remove the cameraWire rope supplied Installation and Connections To remove the camera Connecting the RM-BR300 Remote Control Unit Connecting to an AC OutletConnections Visca RS-422 Connecting a Device Equipped with Visca RS-232C Connector Connecting a Device Equipped with Visca RS-422 ConnectorVisca RS-422 HD-SDI Input Connectors Generator Connecting a VTR Equipped withTo connect a single camera To connect multiple cameras to the HD sync signal generator You can connect up to seven camerasList of Messages Indicators on the BRC-Z330 cameraMessages for the BRC-Z330 camera Troubleshooting Symptom Cause RemedyAppendix Troubleshooting Menu Configuration Full AutoNormal YP BP R Color Gain Color HUE Color Matrix Enhance General presetting items Presetting ItemsPresetting menu items Setup not available for 1080/50i output signal Supplied accessories SpecificationsInput/output connectors SystemAlways verify that the unit is operating properly before use Ceiling Bracket B DimensionsBRC-Z330 Video Camera Top Side FrontRM-BR300 Remote Control Unit Top Visca RS-232C OUT connector mini DIN 8-pin, female Visca RS-422 connector connector plug 9-pinVisca RS-232C in connector mini-DIN 8-pin, female Pin AssignmentsRM-BR300 Remote Control Unit optional Visca RS-232C output connector mini DIN 8- pin, femaleThird to Seventh BRC-Z330 Wiring Diagram of Visca RS-422 ConnectionRM-BR300 Remote Control Unit Second BRC-Z330Using the Visca RS-422 Connector Plug To remove the connector plug

BRC-Z330 specifications

The Sony BRC-Z330 is a sophisticated PTZ (pan-tilt-zoom) camera that has gained popularity in various applications, including broadcasting, event production, and corporate video conferencing. One of its most striking features is its ability to deliver high-quality images through a 1/2.8-type Exmor CMOS sensor. This sensor allows the BRC-Z330 to capture stunning Full HD 1080p video at 60 frames per second, making it suitable for fast-paced environments.

The camera features a 30x optical zoom lens, which is complemented by a 12x digital zoom, providing users with the ability to focus on details from a considerable distance. With a focal length range of 4.5mm to 135mm, it is versatile enough to work in various shooting scenarios, whether it be capturing wide shots of a conference room or zooming in on a speaker at an event.

In terms of connectivity, the BRC-Z330 offers multiple output options, including HDMI, 3G-SDI, and composite video outputs. This flexibility allows for seamless integration into different broadcasting and recording setups. Additionally, the camera supports IP streaming, enabling remote access and control over a network, which is invaluable for multi-camera setups and remote production tasks.

The BRC-Z330 employs advanced image processing technologies, such as Sony's Dynamic Contrast Enhancement and XDNR (eXtended Dynamic Noise Reduction). These features work to optimize image quality in various lighting conditions, ensuring crisp and clear visuals even in challenging environments.

For ease of operation, the BRC-Z330 is equipped with a user-friendly interface and can be remotely controlled via RS-232 or RS-422 protocols. This functionality is ideal for situations where the camera needs to be adjusted without physical intervention, such as live-streaming events or remote interviews.

Another significant characteristic of the camera is its compact and discreet design, allowing it to blend into various settings without being obtrusive. With its impressive specifications and technological capabilities, the Sony BRC-Z330 has become an essential tool for professionals seeking high-quality video solutions in the ever-evolving world of media production. Its reliability, versatility, and excellent image quality make it a worthy investment for any organization focused on producing top-tier content.
Top Page Image Contents