Classe Audio SSP-800/CT-SSP owner manual NON-RACK-MOUNT Installation for SSP

Page 10

Important!

CT-SSP rack-mount installation

CT-SSP stand-alone installation instructions

10

•Allow at least three inches (7.5 cm) of clearance above and to each side of the processor for ventilation. Do not obstruct the area around the processor so that excess heat can dissipate through normal air circulation. Avoid placing the processor on a soft surface, such as plush carpeting, that may restrict airflow.

Obey all placement considerations. Not obeying the placement considerations may result in damage that is not covered under the warranty.

FOR RACK MOUNTING INSTALLATION CONTACT YOUR CLASSÉ PROFESSIONAL.

NON-RACK-MOUNT INSTALLATION FOR SSP:

1a. Install (4) feet and secure with (4) #6 flat washers and

(4) 6-32 X 9/16 philips pan head screws.

Tighten to

5.0 in-lbs (0.56 N-m)

Optional accessory feet can be purchased and installed as below.

Image 10

Contents SSP-800/CT-SSP Surround Sound ProcessorClass Important Safety Instructions Contents Name PlayLinkIntroduction Welcome to the Classé family Exceptional Design Features Page Unpacking and Placement Unpacking your SSPNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Standby/On Button and Status Indicator Front PanelsAudio Mute Control Menu On/Off ButtonTouchscreen IR windowVolume Control Knob Serial number Rear PanelComposite Video Inputs Component Video Inputs Hdmi InputsDigital Audio Inputs Coaxial Hdmi OutputsComponent Video Output Digital Audio Inputs Optical10 7.1-Channel Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 11 2-Channel Balanced Analog Audio InputsTrigger Outputs IR InputIR Output USB Port 17 RS-232 PortCAN-Bus Input and Output 19 10-Channel Analog OutputsMain Power On/Off Switch AC Power Cord InputAudio Processing Functions Remote ControlBasic Functions Input Sel Selection ButtonNavigation & Menu Buttons Preset Config Configuration ButtonVolume Control & Mute Buttons Function Keys F1 to F4Step Initial SetupChoose the appropriate cables Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing Dolby TrueHDUsing the SSP-800/CT-SSP Source selectionMode selection Name DescriptionDTS Neo6 Cinema Controls System trimsConfiguration select Menu System System setup Volume setupMax volume Startup volume IR setup Automation Mute setup Input setup NameAudio Configuration Use Video Next input TriggersProfiles Room EQ Configuration Name Distances Levels Use SpeakersSpeakers available Auxiliary channels Teach IR Display setup Black levelBrightness Timeout Language OSD on screen display Colors Volume Dolby/DTSDolby Pro Logic DTS Neo6 Dolby Volume Remote Fkeys Important note on Fkey useFeatures Version info SensorsCategory 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus TerminatorUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit There is a hum coming out of the speakers IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming from the SSPVoltage Protection Circuit Care & Maintenance Input factory defaultsNet weight SpecificationsOverall dimensions Shipping weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3