Classe Audio SSP-800/CT-SSP owner manual Black level, Teach IR Display setup

Page 51

black level

teach IR

display setup

The more button on the System Setup screen accesses the Black Level setting. The “video setup” in North America assumes that black is reproduced at a video level of 7.5 IRE units, while most of the rest of the world assumes that video black is represented by a video level of 0 IRE units. The SSP can operate either way; you should pick the standard common to your area for compatibility with the rest of your video sources.

The complete list of SSP-800/CT-SSP discrete infrared (IR) command codes extends far beyond what is practical for handheld remote controls. However, many of these functions are critical if you plan to create a customized remote control with macros that take command of your entire system. Without these discrete codes, many of the macros you might want to create simply won’t work reliably.

The Teach IR page displays a scrolling list of all the available IR codes in the Surround Sound Processor. Simply scroll to the command you want your macro-capable remote to learn and touch the Send IR Code button. The SSP continuously sends the appropriate command code via the front panel - as long as the button is pressed – until your third-party remote control has learned it.

For more information on control systems, we recommend you speak with your authorized Classé dealer.

The Display Setup menu page, shown below, allows you to configure the brightness, display timeout, and language used in the front panel and menu system. It also determines the format and color of the OSD (on-screen display), and how volume settings are displayed on your system.

51

Image 51
Contents Surround Sound Processor SSP-800/CT-SSPClass Important Safety Instructions Contents PlayLink NameWelcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP Unpacking and PlacementNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Front Panels Standby/On Button and Status IndicatorIR window Menu On/Off ButtonTouchscreen Audio Mute ControlVolume Control Knob Rear Panel Serial numberComposite Video Inputs Hdmi Inputs Component Video InputsDigital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial11 2-Channel Balanced Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 10 7.1-Channel Analog Audio InputsUSB Port 17 RS-232 Port IR InputIR Output Trigger Outputs19 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchInput Sel Selection Button Remote ControlBasic Functions Audio Processing FunctionsFunction Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu ButtonsInitial Setup StepChoose the appropriate cables Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Dolby TrueHD Post-processingSource selection Using the SSP-800/CT-SSPName Description Mode selectionDTS Neo6 Cinema System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Black level Teach IR Display setupBrightness Timeout Language OSD on screen display Dolby/DTS Colors VolumeDolby Pro Logic DTS Neo6 Dolby Volume Important note on Fkey use Remote FkeysVersion info Sensors FeaturesCAN-Bus Terminator Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Troubleshooting Everything appears to be powered on, but there is no soundThere is no sound and the Standby LED is not lit There is a hum coming from the SSP IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakersVoltage Protection Circuit Input factory defaults Care & MaintenanceShipping weight SpecificationsOverall dimensions Net weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3