status
version info
sensors
CAN-Bus
features
56
The Status screen provides several items of information on the currently playing disc, as well as access to information on the software used in and the internal sensors of the SSP. While on this page, pressing the more key will access the
The version info button on the status screen takes you to the Version Information screen, which displays information on various pieces of software used by your SSP. If you ever have occasion to call our technical support people to ask a question not covered in this manual, they may want to know precisely what version of software your unit is running. Having this information available will help enable them to give you the best possible service.
The sensors button on the status screen takes you to the Sensors screen, which displays information about several internal sensors within the SSP. It is unlikely you might ever need the sensor information, unless directed to do so by a customer service representative at Classé in order to help troubleshoot some unexpected problem.
Classé’s Controller Area Network, or
of interaction between our Delta range of amplifiers, preamps, processors and source components. When the SSP is connected with
•Display status information for every connected unit, including amplifiers which do not have a touchscreen display.
•Create a “PlayLink” that allows an SSP or Preamp to automatically switch to the correct input when a Delta series source component starts playback.
•Adjust the global system brightness.
•Configure the entire system to go in and out of standby at the touch of a button and also bring individual components in and out of standby.
•Mute any connected unit.