Classe Audio SSP-800/CT-SSP Specifications, Overall dimensions, Net weight, Shipping weight

Page 66

66

Specifications

All specifications are accurate at the time of printing. Classé reserves the right to make improvements without notice.

nFrequency response 20Hz - 200kHz < 0.1dB, stereo analog bypass 20Hz - 20kHz < 0.2dB, all other sources

nDistortion (THD+noise) 0.001%, digital source/bypassed analog source

.002%, processed analog source

n

Maximum input level (single-ended)

2Vrms (DSP), 6Vrms (bypass)

n

Maximum input level (balanced)

4Vrms (DSP), 12Vrms (bypass)

n

Maximum output level (single-ended)

8Vrms

n

Maximum output level (balanced)

15Vrms

n

Gain Range

 

-100dB to +14dB

n

Input impedance

 

100kΩ

n

Output impedance (main output)

56Ω

n

Signal-to-noise ratio (ref. 10Vrms input)

102dB, bypassed analog source

 

 

 

100dB, processed analog source

 

Channel separation

105dB, digital source

n

better than 100dB

n

Crosstalk (any input to any output)

better than -120dB @ 1kHz

n

Video input impedance

75Ω

n

Video output impedance

75Ω

n

HDMI

v.1.4a supporting 2D and standard 3D video formats

 

 

with resolutions up to 1080p @ 24/50/60 fps,

 

HDMI Ethernet Channel (HEC), Audio Return Channel (ARC),

 

 

Deep Color and x.v.Color(xvYCC)

n

Rated power consumption

75W

nMains voltage determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user

n

Overall dimensions

SSP-800 width: 17.5” (445mm)

 

 

CT-SSP width: 19” (482mm)

 

SSP-800 depth (excluding connectors): 16.5” (419mm)

 

CT-SSP depth (excluding connectors): 14.91” (378.71mm)

 

 

SSP-800 Height: 6.75” (172mm)

 

Net weight

CT-SSP Height: 6.97” (177mm)

n

SSP-800: 29 lbs (13 kg)

CT-SSP: 33 lbs (15 kg)

n

Shipping weight

SSP-800: 38 lbs (17 kg)

CT-SSP: 49 lbs (22 kg)

For more information, see your Classé dealer, or contact:

B&W Group Ltd.

5070 François Cusson, Lachine, Quebec, Canada H8T 1B3

Telephone

+1 (514) 636-6384

FAX

+1 (514) 636-1428

Internet:

http://www.classeaudio.com

email:

cservice@classeaudio.com

Classé and the Classé logo are trademarks of B&W Group Ltd. of Lachine, Canada. All rights reserved. AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

Control 4™ is a trademark of Control 4 Corporation of Saltlake City UT. All rights reserved.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio and the DTS logos are trademarks of DTS, Inc. Product includes software.

© DTS, Inc. All Rights Reserved.

Image 66
Contents SSP-800/CT-SSP Surround Sound ProcessorClass Important Safety Instructions Contents Name PlayLinkIntroduction Welcome to the Classé familyExceptional Design Features Page Unpacking and Placement Unpacking your SSPNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Standby/On Button and Status Indicator Front PanelsAudio Mute Control Menu On/Off ButtonTouchscreen IR windowVolume Control Knob Rear Panel Serial numberComposite Video Inputs Component Video Inputs Hdmi InputsDigital Audio Inputs Coaxial Hdmi OutputsComponent Video Output Digital Audio Inputs Optical10 7.1-Channel Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 11 2-Channel Balanced Analog Audio InputsTrigger Outputs IR InputIR Output USB Port 17 RS-232 PortCAN-Bus Input and Output 19 10-Channel Analog OutputsMain Power On/Off Switch AC Power Cord InputAudio Processing Functions Remote ControlBasic Functions Input Sel Selection ButtonNavigation & Menu Buttons Preset Config Configuration ButtonVolume Control & Mute Buttons Function Keys F1 to F4Initial Setup StepChoose the appropriate cables Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Post-processing Dolby TrueHDUsing the SSP-800/CT-SSP Source selectionMode selection Name DescriptionDTS Neo6 Cinema Controls System trimsConfiguration select Menu System System setup Volume setupMax volume Startup volume IR setup Automation Mute setup Input setup NameAudio Configuration Use Video Next input TriggersProfiles Room EQ Configuration Name Distances Levels Use SpeakersSpeakers available Auxiliary channels Teach IR Display setup Black levelBrightness Timeout Language OSD on screen display Colors Volume Dolby/DTSDolby Pro Logic DTS Neo6 Dolby Volume Remote Fkeys Important note on Fkey useFeatures Version info SensorsCategory 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus TerminatorUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Troubleshooting Everything appears to be powered on, but there is no soundThere is no sound and the Standby LED is not lit There is a hum coming out of the speakers IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming from the SSPVoltage Protection Circuit Care & Maintenance Input factory defaultsNet weight SpecificationsOverall dimensions Shipping weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3