Classe Audio SSP-800/CT-SSP Hdmi Outputs, Component Video Output, Digital Audio Inputs Coaxial

Page 19

4HDMI Outputs

The SSP supports two HDMI outputs, labeled 1 and 2. The

SSP HDMI outputs support HDMI v1.4a featuring 2D and standard 3D video formats at resolutions up to 1080p @ 24/50/60 fps, Audio Return Channel (ARC), HDMI Ethernet Channel (HEC), Deep Colour, x.v.Color(xvYCC) and provides a 2-channel SPDIF downmix of the source material.

Non-HDMI source material is encoded for an HDMI display at the source’s native video rate. By HDCP license agreement, HDMI input signals can NOT be converted to analog format, and are only output via HDMI at the incoming resolution.When an analog video input signal is output via HDMI to the display, the video input is converted to digital format and output at its native rate. The two HDMI outputs are NOT independent.

NOTE: HDMI is an interactive format, which can occasionally cause format errors between the source devices and the output display. If you connect the SSP HDMI outputs to two different displays, the HDMI source automatically provides a signal compatible for both displays. In some cases, this response can result in less-than-optimal resolutions for one or both displays.

5Component Video Output

The SSP is equipped with component video output via 3 RCA connectors labeled Pr, Pb, and Y. Use this connection to connect to non-HDMI displays. The component output does not support output of 1080p signals.

NOTE: Due to HDCP licensing restrictions the component video output will not work with most source material input via HDMI.

6Digital Audio Inputs - Coaxial

The SSP supports four digital audio inputs, with SPDIF connectors labeled COAX1 to COAX4. These inputs accept PCM data streams up to

24-bits long and up to 192 kHz sampling frequency. We recommend using cables that are optimized for digital audio signal transfer and that carry a

75 Ω impedance rating. Your Classé dealer can help you with proper cable selections.

7Digital Audio Inputs - Optical

The SSP supports four digital audio inputs, with optical TOSlinkTM connectors labeled OPT1 to OPT4. These inputs accept PCM data streams up to 24-bits long and up to 192 kHz sampling frequency. We recommend using cables that are optimized for digital audio signal transfer. Your Classé dealer can help you with proper cable selections.

NOTE: The bandwidth limits of TOSlink™ components are very much strained at a 192 kHz sampling frequency. For that reason we recommend keeping the TOSlink™ connections at a maximum rate of 96 kHz.

19

Image 19
Contents Surround Sound Processor SSP-800/CT-SSPClass Important Safety Instructions Contents PlayLink NameWelcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP Unpacking and PlacementNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Front Panels Standby/On Button and Status IndicatorIR window Menu On/Off ButtonTouchscreen Audio Mute ControlVolume Control Knob Serial number Rear PanelComposite Video Inputs Hdmi Inputs Component Video InputsDigital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial11 2-Channel Balanced Analog Audio Inputs Digital Audio Output CoaxialDigital Audio Output Optical 10 7.1-Channel Analog Audio InputsUSB Port 17 RS-232 Port IR InputIR Output Trigger Outputs19 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchInput Sel Selection Button Remote ControlBasic Functions Audio Processing FunctionsFunction Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu ButtonsStep Initial SetupChoose the appropriate cables Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Dolby TrueHD Post-processingSource selection Using the SSP-800/CT-SSPName Description Mode selectionDTS Neo6 Cinema System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Black level Teach IR Display setupBrightness Timeout Language OSD on screen display Dolby/DTS Colors VolumeDolby Pro Logic DTS Neo6 Dolby Volume Important note on Fkey use Remote FkeysVersion info Sensors FeaturesCAN-Bus Terminator Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log Everything appears to be powered on, but there is no sound TroubleshootingThere is no sound and the Standby LED is not lit There is a hum coming from the SSP IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakersVoltage Protection Circuit Input factory defaults Care & MaintenanceShipping weight SpecificationsOverall dimensions Net weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3