Caution!
input factory defaults
Care & Maintenance
To remove dust from the cabinet of your Surround Sound Processor, use a feather duster or a
Dampen the cloth with alcohol first and then lightly clean the surface of the Surround Sound Processor with the cloth. Do not use excessive amounts of alcohol that might drip off the cloth and into the Surround Sound Processor.
Power down and remove the AC power cord from the
SSP before performing maintenance. At no time should liquid cleaners be applied directly to the Surround Sound Processor, as direct application of liquids may result in damage to electronic components within the unit.
For your convenience, here are the factory default settings for the
SSP-800/CT-SSP Surround Sound Processor.
Input # | Default Audio Connector | Default Video Connector |
1 | Coaxial Digital 1 | None |
2 | Coaxial Digital 2 | None |
3 | Coaxial Digital 3 | None |
|
|
|
4 | Coaxial Digital 4 | None |
|
|
|
5 | Optical Digital 1 | None |
|
|
|
6 | Optical Digital 2 | None |
|
|
|
7 | Optical Digital 3 | None |
|
|
|
8 | Optical Digital 4 | None |
|
|
|
9 | XLR Analog 1 | None |
|
|
|
10 | RCA Analog 2 | None |
|
|
|
11 | RCA Analog 3 | None |
|
|
|
12 | Coaxial Digital 1 | None |
|
|
|
13 | Coaxial Digital 2 | None |
|
|
|
14 | Coaxial Digital 3 | None |
|
|
|
15 | Optical Digital 1 | None |
|
|
|
16 | Optical Digital 2 | None |
|
|
|
17 | Optical Digital 3 | None |
|
|
|
18 | XLR Analog 1 | None |
|
|
|
19 | RCA Analog 2 | None |
|
|
|
20 | RCA Analog 3 | None |
|
|
|
65