Classe Audio SSP-800/CT-SSP owner manual Power up the system

Page 29

Step 6

Power up the system!

Now you are ready to power up your SSP and your surround system.

•Turn the rear panel power switch of the SSP to ON.

•The initial power-up cycle of the SSP takes approximately 90 seconds. During this time, the blue LED on the standby button flashes. (For the

CT-SSP, the standby button itself will flash blue.)

•When the power-up cycle is complete, the SSP enters Standby mode.

The LED (or standby button) stops flashing but remains illuminated, indicating that the SSP is in Standby mode. Refer to the Front Panel section, for more details about Standby mode.

•Press the Standby button or the front panel touchscreen to bring the SSP to its fully ON mode. The front panel touch screen displays a blue screen with an “initializing” message and then switches to the home page of the menu system. Refer to the Menu System section found later in the manual for more information.

The physical setup of the SSP and system components is complete.

29

Image 29

Contents Surround Sound Processor SSP-800/CT-SSPClass Important Safety Instructions Contents PlayLink NameWelcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP Unpacking and PlacementNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Front Panels Standby/On Button and Status IndicatorTouchscreen Menu On/Off ButtonAudio Mute Control IR windowVolume Control Knob Composite Video Inputs Rear PanelSerial number Hdmi Inputs Component Video InputsComponent Video Output Hdmi OutputsDigital Audio Inputs Coaxial Digital Audio Inputs OpticalDigital Audio Output Optical Digital Audio Output Coaxial10 7.1-Channel Analog Audio Inputs 11 2-Channel Balanced Analog Audio InputsIR Output IR InputTrigger Outputs USB Port 17 RS-232 Port19 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchBasic Functions Remote ControlAudio Processing Functions Input Sel Selection ButtonVolume Control & Mute Buttons Preset Config Configuration ButtonNavigation & Menu Buttons Function Keys F1 to F4Choose the appropriate cables Initial SetupStep Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Dolby TrueHD Post-processingSource selection Using the SSP-800/CT-SSPName Description Mode selectionDTS Neo6 Cinema System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Black level Teach IR Display setupBrightness Timeout Language OSD on screen display Dolby/DTS Colors VolumeDolby Pro Logic DTS Neo6 Dolby Volume Important note on Fkey use Remote FkeysVersion info Sensors FeaturesClassé Delta Series Products Hardware setupCategory 5 Network Cables CAN-Bus TerminatorUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log There is no sound and the Standby LED is not lit TroubleshootingEverything appears to be powered on, but there is no sound Only one speaker seems to be playing IR remote control does not seem to functionThere is a hum coming out of the speakers There is a hum coming from the SSPVoltage Protection Circuit Input factory defaults Care & MaintenanceOverall dimensions SpecificationsNet weight Shipping weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3