Classe Audio SSP-800/CT-SSP owner manual Main Power On/Off Switch, AC Power Cord Input

Page 23

Danger!

20Main Power On/Off Switch

This switch connects and disconnects the SSP from AC.

NOTE: Changes to settings are stored whenever the SSP is put into Standby. Turning off power to the unit before first entering Standby mode erases any setting changes that have been made since the unit was last placed in Standby mode.

21AC Power Cord Input

The detachable three-conductor AC power cord and the socket into which it connects conform to rigorous standards developed by the IEC (International Electrotechnical Commission).

Your SSP contains potentially dangerous voltages and current capabilities. Do not attempt to open it! There are no user- serviceable parts inside. All service must be referred to a qualified authorized Classé dealer or distributor.

23

Image 23

Contents Surround Sound Processor SSP-800/CT-SSPClass Important Safety Instructions Contents PlayLink NameWelcome to the Classé family IntroductionExceptional Design Features Page Unpacking your SSP Unpacking and PlacementNON-RACK-MOUNT Installation for SSP Tighten to In-lbs 0.96 N-m Warm-up/break-in period Operating voltage Voltage protection Front Panels Standby/On Button and Status IndicatorIR window Menu On/Off ButtonTouchscreen Audio Mute ControlVolume Control Knob Composite Video Inputs Rear PanelSerial number Hdmi Inputs Component Video InputsDigital Audio Inputs Optical Hdmi OutputsComponent Video Output Digital Audio Inputs Coaxial 11 2-Channel Balanced Analog Audio Inputs Digital Audio Output Coaxial Digital Audio Output Optical 10 7.1-Channel Analog Audio InputsUSB Port 17 RS-232 Port IR InputIR Output Trigger Outputs19 10-Channel Analog Outputs CAN-Bus Input and OutputAC Power Cord Input Main Power On/Off SwitchInput Sel Selection Button Remote ControlBasic Functions Audio Processing FunctionsFunction Keys F1 to F4 Preset Config Configuration ButtonVolume Control & Mute Buttons Navigation & Menu ButtonsChoose the appropriate cables Initial SetupStep Connect all source components to the SSP rear panel Terminals to black terminals Power up the system Understanding Surround Sound Name Dolby TrueHD Post-processingSource selection Using the SSP-800/CT-SSPName Description Mode selectionDTS Neo6 Cinema System trims ControlsConfiguration select Menu System Volume setup System setupMax volume Startup volume IR setup Automation Mute setup Name Input setupAudio Configuration Triggers Use Video Next inputProfiles Room EQ Configuration Name Distances Use Speakers LevelsSpeakers available Auxiliary channels Black level Teach IR Display setupBrightness Timeout Language OSD on screen display Dolby/DTS Colors VolumeDolby Pro Logic DTS Neo6 Dolby Volume Important note on Fkey use Remote FkeysVersion info Sensors FeaturesCAN-Bus Terminator Hardware setupClassé Delta Series Products Category 5 Network CablesUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status PlayLink Amp info Event log There is no sound and the Standby LED is not lit TroubleshootingEverything appears to be powered on, but there is no sound There is a hum coming from the SSP IR remote control does not seem to functionOnly one speaker seems to be playing There is a hum coming out of the speakersVoltage Protection Circuit Input factory defaults Care & MaintenanceShipping weight SpecificationsOverall dimensions Net weightSSP-800 Dimensions CT-SSP Dimensions Installation Worksheet Lachine, Quebec Canada H8T 1B3