INSTALLATION
2. Connect the RCA cable inputs into their perspective plugs on the amplified subwoofer.
High Level (H.L.) Input connection
1.Using the cord profided, splice directly into the source unit's speaker outputs. Do not break connection with the source unit and speakers. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result.
NOTE: REM connection is not required for this method. When power is supplied to the speaker wires from the source, the amplified subwoofer will automatically turn on.
REMOTE PUNCH BASS | Mounting | |
Mounting and installation | ||
Clip |
1. Find a location, either under the dash or near the center console, that gives easy access to the remote.
2. Using the screws supplied, install the mounting clip with the tabs towards the back.
3. Route the cable for the remote and |
|
connect to both the remote and | Knob |
amplifed subwoofer. |
4. Slip the remote onto the mounting clip until it snaps into place.
Decal
5. Install the decal and knob onto the remote.
7