Beaming information
When synchronization is complete, a message appears at the top of your smartphone screen. Be patient; synchronization may take a few minutes.
MAC ONLY
1.
2.Click the HotSync Controls tab, and then select Enabled.
3.Click the Connection Settings tab, and then check the On box next to IR port.
4.Close the HotSync Software Setup window.
5.On your smartphone, go to Applications and select HotSync .
6.Select Local.
7.Select the pick list below the HotSync icon and select IR to a PC/Handheld.
8.Position the IR port of your smartphone within a few inches of the IR port of your computer.
9.Select the HotSync icon on your smartphone.
When synchronization is complete, a message appears at the top of your smartphone screen. Be patient; synchronization may take a few minutes.
Using Your Treo 700P Smartphone | 212 |