8.After the INCLINE TRAINER is placed in the location where it will be used (refer to HOW TO MOVE THE INCLINE TRAINER below), make sure that both Rear
Feet (66) and both front Wheels (not shown) rest firmly on the floor. If the INCLINE TRAINER rocks even slightly, turn the right Rear Foot clockwise or counter- clockwise until the rocking motion is eliminated.
8 |
66 |
9. Make sure that all parts are properly tightened before you use the INCLINE TRAINER. | Keep the included |
allen wrenches for adjustment purposes. To protect the floor or carpet from damage, place a mat under the |
|
INCLINE TRAINER. |
|
H OW TO | M OVE THE | INCLINE |
Before moving the INCLINE TRAINER, adjust the incline to 30% and then unplug the power cord. Note: It may be necessary to disconnect the CATV cable and the network wire from the INCLINE TRAINER, depending on how far the INCLINE TRAINER will be moved.
Due to the size and weight of the INCLINE
TRAINER, moving it requires two persons.
one person lifts the indicated end of the INCLINE TRAINER, firmly hold the handrails and tip the IN- CLINE TRAINER forward until it rolls on the front wheels. Carefully move the INCLINE TRAINER to the desired location and then lower it back to the level position. Note: Another way to move the IN- CLINE TRAINER is to have one person stand on
each side of it, lift the frame, and move it on the rear wheels.
T | RAINER |
|
| Rear |
|
| Wheels | Tip |
|
| |
|
| Handrails |
| Lift |
|
While | Here |
|
|
| |
|
| Front Wheels |
CAUTION: To reduce the risk of injury, use extreme caution while moving the INCLINE TRAINER. Do not attempt to move the INCLINE TRAINER over uneven surfaces.
9