NordicTrack CTK65020 user manual Enable or disable the TV

Page 25

Press the ENTER AGE/WT button again to

9 check for system errors.

If there are no system errors, the words NO SYS- TEM ERRORS will appear in the main display. If the words LUBRICATE DECK appear in the main display, the walking platform should be checked for adequate lubricant. Follow the instructions in step 4 on page 29 to lubricate the walking platform if necessary. Then, refer to HOW TO RESET THE LUBE REMINDER on page 25. If the words IN- CLINE OVERHEAT ERROR appear in the main display, press the RESET button. If the same sys- tem error appears repeatedly, call Customer Care toll-free at 1-800-201-2109.

10

Press the ENTER AGE/WT button again and

enable or disable the lubrication reminder.

The console can be set to display the words LU- BRICATE DECK every five minutes when the walking platform needs to be lubricated. Press the

+or – button beside the ENTER AGE/WT button until the words LUBE REMINDER ENABLED ap- pear in the main display. To turn off the lubrication reminder, press the + or – button until the words LUBE REMINDER DISABLED appear.

Press the ENTER AGE/WT button again and

11 enable or disable the safety key.

To require the use of the safety key with the con- sole, press the + or – button beside the ENTER AGE/WT button until the words SAFETY KEY EN- ABLED appear in the main display. To allow the INCLINE TRAINER to be used without the key, press the + or – button until the words SAFETY

KEY DISABLED appear.CAUTION: If the safety key is missing or damaged, call Customer Care

toll-free at 1-800-201-2109, Monday through Friday, 8 a.m. until 5 p.m. Mountain Time.

 

If you have the Basic console, go to step 16. If

 

you have the Workout TV console, go to step

 

12.

 

Press the ENTER AGE/WT button again and

12

enable or disable the TV.

 

To make the TV available for use, press the + or – button beside the ENTER AGE/WT button until the words TV POWER ON appear in the main display.

To prevent the TV from being used, press the + or

– button until the words TV POWER OFF appear.

If you have disabled the TV, go to step 16. If you have enabled the TV, go to step 13.

Press the ENTER AGE/WT button again and

13 select a cable TV connection or an antenna connection.

If you are using a cable TV connection, press the +

or – button beside the ENTER AGE/WTbutton until the words TV MODE CABLE STATIONS ap-

pear in the main display. If you are using an an- tenna connection, press the + or – button until the words TV MODE AIR STATIONS appear.

14 Press the ENTER AGE/WT button again and program TV channels.

The console has the capability to find and store in memory all of the valid TV channels in your area. While the words PRESS CHANNEL UP TO SCAN TV CHANNELS are scrolling across the main dis- play, press the CHANNEL + button to start the channel scanning process.

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Serial Number Decal Model No. CTK62520 Model No. CTK65020 Serial NoFree at Mon.-Fri., 8 a.m.-5 p.m. MST Section AblePage Incline Trainer Never insert or drop any object into any opening Arning Ecal Disconnect powerBefore servicing For your benefit, read this manual carefully before EforeTrainer Incline RainerUpright 96, 107 in the indicated locations Upright Bolts yetEight Upright Bolts in the Uprights Upright Cap ScrewsRear Wheels Tip OW to OVELift While Here OW to HOW to Connect a Catv CableOnnect ReceptacleOW to Onnect Your HOW to Connect Your Portable CD PlayerHead PhonesOW to Pgrade Your Asic Features of the ConsoleGetting Started Select the manual mode HOW to USE the Manual ModeTo start the walking belt DesiredMeasure your heart rate if desired Pulse/% MaxStand Avoid Moving your HandsSelect one of the six preset programs HOW to USE Preset ProgramsRestart the program, press the Start To the incline and speed settings for the next segmentNext segment Whenkey.the program is completed, removeChest pulse sensor HOW to USE PULSE-DRIVEN ProgramsRefer to Getting Started on Words Moab RIM PULSE, Slickrock7Follow your progress with the main display HOW to USE the Fitness Test ProgramCompatible chest pulse sensor You must wear a chest pulse sensor to useReaches 70% of your estimated maximum heart At the end of each minute of the program, a toneTen fitness levels fitness level And/or To the next settings of the CD programHeard Measure your heart rate, if desiredHOW to USE the Maintenance Mode If you are using a cable TV connection, press the + Enable or disable the TVHOW to Reset the Lube Reminder Addition, the console offers three pulse-driven pro Gram automatically controls the speed and inclineAdjust the volume HOW to USE the Workout TV ConsoleCline Trainer in order for cable TV stations to Page Monthly Maintenance Weekly MaintenanceReventive Remove the key and unplug Turning the Walking PlatformReplacing the Walking Platform Replacing the Walking BeltPropriate spaces IX MonthIX Month Symptom the Power Turns OFF During USE Symptom the Power does not Turn onSymptom the Walking Belt Slows When Walked on Symptom the Walking Belt is OFF-CENTER Factors in a Sensible Diet XerciseExercise Steps Establish personal fitness goalsWarm up before you begin Weight Loss TipsStretch after your warm-up Toe Touch StretchGet FIT with NordicTrack Benefits of Aerobic Exercise7Cool down after aerobic exercise Stretch again at the end of your exercise SessionWorkout Programs Workout TipsImited Arranty Exclusive Warranty Receipt of Parts and ServiceUnauthorized Changes to Warranty State LawsKey Qty Description ARTQty 141 Strain Relief 133 169 143 144 126 151 Xploded172 115 159 167 165 152 155 141 170 Part 2119 114 120 166 158 168 3343 162 148 153 152 135 148 114140 142 100 Part 3149 101 130 132 102 103 175 104 9997 174 111 6591 105 108 109 110 112 134 136 106 107 137 138OW to Rder Eplacement
Top Page Image Contents