12.Attach the Butterfly Frame (12) to the Backrest Upright (8) with two M10 x 67mm Button Bolts (90), two M10 Washers (84), and two M10 Nylon Locknuts (79). Do not tighten the Nylon
Locknuts yet.
12 |
| 8 |
| 90 | |
|
|
| 84 | ||
|
|
|
|
| |
|
| 79 |
|
| 90 |
| 12 |
|
| 84 | |
|
|
|
|
| |
13.Apply some of the included grease to an M10 x 85mm Button Bolt (144) and the two Arm Bushings (31) in the Left Arm (10). Attach the Left Arm to the Butterfly Frame (12) with the Button Bolt and an M10 Nylon Locknut (79). Do not overtighten the Nylon Locknut; the Left Arm must pivot easily.
Repeat this step with the Right Arm (11).
14.Attach the Top Frame (16) to the Center Top Frame (14) with two M10 x 116mm Button Bolts (101), four M10 Washers (84), and two M10 Nylon Locknuts (79). Do not tighten the Nylon
Locknuts yet.
Attach the Top Frame (16) to the Butterfly Frame (12) and the Backrest Upright (8) with four M10 x 67mm Button Bolts (90), four M10 Washers (84), and four M10 Nylon Locknuts (79). Do not tight- en the Nylon Locknuts yet.
Attach the Top Frame (16) to the Carriage Guides
(64)with two M10 x 93mm Button Bolts (97), four
M10 Washers (84), four 25mm Spacers (55), and two M10 Nylon Locknuts (79). Do not tighten the
Nylon Locknuts yet.
13 |
|
| 144 |
|
|
| |
|
|
| Grease |
12 |
|
| 31 |
11 | 79 |
| 31 |
|
| Grease | |
|
|
| 10 |
14 |
|
|
|
90 |
|
| 16 |
|
|
| |
|
| 84 |
|
101 |
|
|
|
84 |
|
| 79 |
|
|
| |
|
|
| 55 |
|
|
| 84 |
8 |
|
| 55 |
|
|
| |
12 |
| 97 | 84 |
|
| ||
|
|
| |
79 |
|
| 64 |
| 79 | ||
14 |
|
|
|
84 |
|
|
|
79 |
|
|
|
12