Gold's Gym GGBE6974.1 manual Nylon Locknut the Cable must pivot easi

19. Route the Butterfly Cable (71) over a “V”-pulley	19
(60). Attach the “V”-pulley, a Large Cable Trap
(61), an M10 Washer (84), and two Full Finger			8
Guards (39) to the Backrest Upright (8) with an
M10 x 62mm Button Bolt (88) and an M10 Nylon			61	79
Locknut (79). Make sure that the Large Cable
			39
Trap is oriented to hold the Cable in the		60
groove of the “V”-pulley.		39	84
			71
			88
20. Attach the Butterfly Cable (71) to the Left Arm	20
(10) with an M8 x 19mm Shoulder Bolt (85) and
an M8 Nylon Locknut (78). Do not overtighten
the Nylon Locknut; the Cable must pivot easi-			85
ly.
		10
			71
			78
21. Locate the High Cable (73). Route the Cable up	21		73
through the Top Frame (16) and over a 90mm					97
		58
Pulley (58). Attach the Pulley inside of the Top
Frame with an M10 x 93mm Button Bolt (97), two					84
M10 Washers (84), two 25mm Spacers (55), and		55		55
an M10 Nylon Locknut (79).					16
		79
		84
22. Route the High Cable (73) over a 90mm Pulley	22		73
(58) and down through the Top Frame (16).					97
				58
Attach the Pulley inside the Top Frame with an
					84
M10 x 93mm Button Bolt (97), two M10 Washers		16		55
(84), two 25mm Spacers (55), and an M10 Nylon
Locknut (79).		55
		84
		79
	14