7000 PT CONSOLE
| [SELECT] “CONTRAST ADJ” | 5 | ||
| [SELECT] “MAX SPEED” - N/A- | 6 | ||
| [SELECT] “CLINICAL | 7 | ||
| [SELECT] “SET DEFAULTS “ | 9 | ||
Machine Status Codes |
| |||
[ | ^ ] [ 4 ] [ 0 | ] display machine run time in hours | ||
[ | ^ ] [ 4 ] [ 1 | ] display number of workouts | ||
[ | ^ ] [ 4 ] [ 2 | ] display distance traveled |
| |
[ | ^ ] [ 4 | ] [ 3 | ] display software rev |
|
[ | ^ ] [ 4 | ] [ 4 | ] display machine type |
|
[ | ^ ] [ 4 | ] [ 5 | ] |
|
[ | ^ ] [ 4 | ] [ 6 | ] display machine run time in hours since last cleared | |
|
|
| (used for maintenance) |
|
1.Display the machine run time by pressing [LEVEL: ^], [4], [0]. The console will display “RUN HOURS XXXXX”.
2.Display the number of workouts by pressing [LEVEL: ^], [4], [1]. The console will display “WORKOUTS XXXX.”
3.Display the total distance covered up to date by pressing [LEVEL: ^], [4], [2]. The console will then display “DISTANCE XXXX.”
4.Display the console software revision number by pressing [LEVEL: ^], [4],
[3].The console will display “CONS 92111-XXX.”
5.Display the machine type by pressing [LEVEL: ^], [4], [4]. The console will display “STEPPER (or other machine type).”
6.Display the machine run time since last cleared by pressing [LEVEL: ^], [4],
[6].The console will display “MAINT HOURS XXXX.”
Page 29