Enabling or Disabling the Fitness Test
The Fitness Test is disabled at the factory. When the Fitness Test is disabled, it is not available in the list of programs. If you wish to add the option to the user’s choice of programs on the treadmill, you need to enable the Fitness Test.
Note: If you enable the Fitness Test on either the C956i or C966i, it replaces Custom 2 (program number 16).
16.At the FITNESS TEST prompt, use an arrow key to display ENABLE or DISABLE, depending on whether or not you want to allow access to the Fitness Test.
17.When you are ready, press SELECT (C952i) or ENTER to save the selection and return to the Precor banner.
Note: If you prefer to exit the program without changing the selection, press RESET or the red STOP button.
Informational Displays (C952i)
The treadmill provides information about its use (odometer and hour meter), as well as software version, and error log. In general, you would only access this information if directed to do so by Precor Customer Support.
These instructions guide you through all four informational displays.
Viewing the Odometer
1.At the Precor banner, press the following keys in sequence and without pause:
RESET, SPEED ▼, SELECT
Numbers appear on the display as you press the associated key.
MILES (KILOMETERS) appears on the display followed by the odometer value (the number of cumulative miles or kilometers users have taken).
2.When you are ready, press SELECT to move to the next display (hour meter).
Product Owner’s Manual: Club Features | 14 |