Keypad
Use the keypad to enter your workout session selections. Keys on the keypad respond to the slightest touch. Use gentle pressure on the keys as you exercise.
The incline setting affects the column height in the program profile as shown in Diagram 4.
The height of the column indicates the level of incline. Every time the incline changes by four sequential levels (up or down) the height of the column changes by one row. The top row lights when inclines are 12% or above.
STOP
Column height
Incline Setting
12 – 15
10 – 11.5
8 – 9.5
6 – 7.5
4 – 5.5
2 – 3.5
0 – 1.5
INCLINE ▲▼: Press and hold the INCLINE arrow keys to increase or decrease the incline from 0% to 15% in 0.5% increments.
During your workout, to view your current incline, tap either INCLINE ▲ or ▼ key. To change the incline, press the arrow key for more than one second.
Changes to the incline are not immediate. It takes time for the lift to reach the target incline shown on the display.
Diagram 4: Column height affected by changes in incline
Note: During the setup phase, pressing the INCLINE arrow keys will not affect the incline. However, the arrow keys do affect what appears on the display. Refer to Selecting a Program.
RESET: During pause mode, press the RESET key to display a WORKOUT SUMMARY. Press RESET again to return to the Precor banner. No workout statistics are saved.
QUICKSTART: Press QUICKSTART to bypass the setup prompts and start your workout immediately using the Manual Program. Refer to Choosing QUICKSTART.
User’s Reference Manual: Display Console | 11 |