Choosing a Language (C952i)
The treadmill can display user prompts, text, and user entries in six different languages. When the treadmill is shipped from the factory it is set to display English.
Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English.
To change the language setting, perform the following steps:
1.At the scrolling Precor banner, press the following keys in sequence and without pause:
RESET, SELECT, SPEED ▼, SELECT, INCLINE ▲, SELECT, SPEED ▼, SELECT
As shown in Diagram 6, numbers are associated with the keypad. The numbers appear on the display as you press the associated key.
1 |
| 6 | 7 |
2 | 4 |
| |
3 | 5 |
| |
|
|
Diagram 6: C952i Keypad programming numbers
2.At the SELECT LANGUAGE prompt, use the arrow keys to choose between ENGLISH, DEUTSCH, ESPANOL, FRANCAIS, NEDERLANDS, and PORTUGUES.
3.When you are ready, press SELECT to move to the next program.
Choosing a Language
(C954i, C956i, C966i)
The treadmill can display user prompts, text, and user entries in six different languages. When the treadmill is shipped from the factory it is set to display English.
Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English.
To change the language setting, perform the following steps:
1.At the Precor banner, press the following in sequence and without pause:
RESET, 5, 6, 5, 1, 5, 6, 5
2.At the SELECT LANGUAGE prompt, use the arrow keys to choose between ENGLISH, DEUTSCH, ESPANOL, FRANCAIS, NEDERLANDS, and PORTUGUES.
3.When you are ready, press ENTER to move to the next program or press RESET to return to the Precor banner.
Product Owner’s Manual: Club Features | 10 |